Muhammad Umair, Muhammad Arslan Khalid, Kulsoom Hanif Sahar, Danish Mahmood Baitab, Adeel Abbas, and Khubab Shaker, "Tensile, Creep, and After Creep Tensile Behaviors of Three-Dimensional (3D) Woven Green Fabrics for Sustainable Packaging", Textiles, Vol. 6, No. 2, (2026), pp.2

Abdul Hanan, Tehseen Ullah, Danish Mahmood Baitab, Muhammad Imran Khan, Adeel Abbas, and Muhammad Umair, "Cellulosic Bio-Fillers (Wood Flour & Rice Husk) Reinforced Green Epoxy/Jute Composites for Impact Applications", Journal of Natural Fibers, Vol. 23, No. 1, (2026), pp.1

Sultan Ullah, , Danish Mahmood Baitab, Muhammad Dawood Husain, and Ali Hamdani Syed Talha, "The application of an intelligent system in digital weave design: optimising light intensity and font selection for enhanced fabric creation", Tekstilec, Vol. 68, No. 02, (2025), pp.02

Amna Siddique, Danish Mahmood Baitab, Muhammad Imran Khan, Muhammad Ayub Asghar, Ali Afzal, and Muhammad Umair, "3D Woven Interlocking Patterns with Enhanced Mechanical and Thermophysical Characteristics", Journal of Engineered Fibers and Fabrics, Vol. 20, No. , (2025), pp.

Muhammad Imran Khan, Shahood uz Zaman, Danish Mehmood Baitab, Syed Talha Ali Hamdani, Yasir Nawab, and Muhammad Umair, "Stretch and recovery properties of combined and combination twill based woven fabrics", Textile Research Journal, Vol. 95, No. 5, (2025), pp.5

Danish Mahmood Baitab, Adeel Abbas, ZA Sumbal, Yasir Nawab, Muhammad Kashif Bangash and Muhammad Umair, "Influence of varying micro fly ash filler concentrations on mechanical behaviors of flax-reinforced green epoxy composites", Mechanics of Composite Materials, Vol. 60, No. 6, (2025), pp.6

Adeel Abbas, Danish Mahmood Baitab, Muhammad Salman Ahmad, Khubab Shaker, Muhammad Imran Khan, and Muhammad Umair, "Eco-friendly hemp woven (two-dimensional and three-dimensional) fabrics for tear and puncture protection; an approach for comfort and ergonomics", International Journal of Occupational Safety and Ergonomics, Vol. 31, No. 4, (2025), pp.4

Danish Mahmood Baitab, Dayang Laila Majid, Ermira Junita Abdullah, and Mohd Faisal Abdul Hamid, "Vibrational characteristics of shape memory alloy-embedded 3D woven composite plate", Journal of Vibration Engineering & Technologies, Vol. 12, No. 3, (2024), pp.3

Danish Mahmood Baitab, Adeel Abbas, Muhammad Bilal Rasool, Daniyal Suhail Baig, Khubab Shaker, and Muhammad Umair, "Thermal, sensorial, and mechanical characterization of hemp woven crepe fabrics; investigating conventional variants for modern applications", Journal of Industrial Textiles, Vol. 54, No. , (2024), pp.

Numan Ahmed, Haq Nawaz Bhatti, Danish Mahmood Baitab, Hassan Iftikhar, Ali Raza Ayub, Khalil ur Rehman, Rashid Farooq, and Hong Fan, "Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study", Journal of Industrial and Engineering Chemistry, Vol. 140, No. , (2024), pp.

Dayang Laila Majid, N Hashim, Danish Mahmood Baitab, Sivasanghari Karunakaran, "Fatigue Analysis of Woven Intraply Carbon/Kevlar Hybrid Composite Below Ambient Temperature", Mechanics of Composite Materials, Vol. 60, No. 4, (2024), pp.4

Danish Mahmood Baitab, Shagufta Riaz, Adeel Abbas, Shahood uz Zaman, Muhammad Zubair, Yasir Nawab, Muhammad Umair, "Scaling thermal and mechanical characteristics of woven honeycombs: A novel endeavor of simultaneous ridges and picking sequence variation", International Journal of Thermal Sciences, Vol. 194, No. , (2023), pp.

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, Leong S Jang, Ishan Mitra Halder, "Flutter performance of shape memory alloy-embedded 3D woven flexible composite plate under subsonic flow", Journal of Industrial Textiles, Vol. , No. , (2022), pp.

Husam Yahya Imran, Dayang Laila Abang Abdul Majid, Saleem Ethaib, Danish Mahmood Baitab and Leong Shii Jang, "Utilization of Shape Memory Alloy (SMA) for Temperature Detection and Warning in an Automobile Engine", IOP Conference Series: Materials Science and Engineering, Vol. 1058, No. , (2021), pp.

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, and Mohd Faisal Abdul Hamid, "Improving the stiffness of multilayer 3D woven composites by the integration of shape memory alloys (SMAs) into structures", The Journal of The Textile Institute, Vol. 111, No. 9, (2020), pp.9

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, "Tensile behavior of multilayer 3D smart woven composites embedded with shape memory alloy (SMA) wires", Journal of Materials Research and Technology (JMR&T), Vol. 9, No. 5, (2020), pp.5

Khubaib Shaker, Muhammad Umair, Madeha Jabbar, Danish Mahmood Baitab, Yasir Nawab, Ali Afzal, Sheraz Ahmad, "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. 23, No. 5, (2019), pp.5

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, "A review of techniques for embedding shape memory alloy (SMA) wires in smart woven composites", International Journal of Engineering & Technology, Vol. 7, No. 4, (2018), pp.4

Adeel Zulifqar, Khubab Shaker, Yasir Nawab, Muhammad Umair, Danish Mahmood Baitab, Muhammad Maqsood , "Investigation of multi-layered woven car seat belts with optimum performance", Industria Textila , Vol. , No. , (2017), pp.

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid, "Modelling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex research journal , Vol. , No. , (2016), pp.

Danish Mahmood Baitab, Dayang Laila Abang Haji Abdul Majid, Ermira Junita Abdullah, Mohd Faisal Abdul Hamid, "Tensile behavior of multilayer 3D smart woven composites embedded with shape memory alloy (SMA) wires", 22nd International Conference a Composite Structures and 1st Chinese Conference on Composite Structures (ICCS22 & CCCS1), Venue: Wuhan, China, (2019)

Danish Mahmood Baitab, Dayang Laila Abang Haji Abdul Majid, Ermira Junita Abdullah, Mohd Faisal Abdul Hamid, "A review of techniques for embedding shape memory alloy (SMA) wires in smart woven composites", Aerotech Conference 7th (Aerotech VII) Sustainability in Aerospace Engineering and Technology, Venue: Putrajaya, Malaysia, (2018)

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Danish Mahmood, Adeel Zulfiqar, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Khubab Shaker, Yasir Nawab, Muhammad Umair, Adeel Zulfiqar, Muhammad Maqsood, Danish Mahmood Baitab, "Finite element modelling of resin flow in woven reinforcement for composites using resin transfer molding", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mahmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mahmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Maratime Technologies Complex

Awarding Body: Development of Parachute Assembly (Co-PI)
Awarding Year: 2024
Amount: 1

Gold Medal

National Textile University  (2012)