Muhammad Umair, Ayesha Shahbaz, Amna Siddique, Khubab Shaker, Zulfiqar Ahmad Rehan*, "Enhancing Fiber Reinforced Polymer Composite Performance through Silane Coupling Agents", Sultan Qaboos University Journal For Science, Vol. , No. , (2025), pp.

Muhammad Umair*, Tehseen Ullah, Adeel Abbas, Yasir Nawab, Abdel-Fattah M Seyam*, "Dynamic Mechanical Performance of 3D Woven Auxetic Reinforced Thermoplastic Composites", Journal of Composites Science , Vol. , No. , (2025), pp.

Tehseen Ullah, Muhammad Umair, Khubab Skaker, Yasir Nawab, Adeel Abbas*, Muzzamal Hussain*, "Enhancing Bonding Properties of Steel-Composite Joints: Effects of Surface Treatments and Adhesive Selection", Polymer Composites, Vol. , No. , (2025), pp.

Yue Yin, Shengkai Liu, Xianyan Wu*, Dong Liu*, Amna Siddique* Muhammad Umair, Chunying Min, Xinke Zhou, Lei Chen, Chuanbin Yu, Zhiwei Xu*, "MOF-based interfacial phase inhibiting structural damage of carbon fiber reinforced polymer composites derived from high-energy irradiation", Composites Part B-Engineering , Vol. , No. , (2025), pp.

Amna Siddique, Danish Mahmood Baitab, Muhammad Imran Khan, Muhammad Ayub Asghar, Ali Afzal, Muhammad Umair*, "3D Woven Novel Interlocking Patterns with Enhanced Mechanical and Thermophysical Characteristics", Journal of Engineered Fibers and Fabrics , Vol. , No. , (2025), pp.

Adeel Abbas, Danish Mahmood Baitab, Muhammad Salman Ahmad, Khubab Shaker, Muhammad Imran Khan, Muhammad Umair*, "Eco-Friendly Hemp Woven (Two- and Three-Dimensional) Fabrics for Tear and Puncture Protection; An Approach for Comfort & Ergonomics", International Journal of Occupational Safety and Ergonomics , Vol. , No. , (2025), pp.

Muhammad Arslan Khalid, Tehseen Ullah, Khubab Shaker, Muzzamal Hussain, Muhammad Ayub Asghar, Muhammad Umair*, "Efficacy of Sustainable Nano Fillers on the Viscoelastic Behavior and Energy Absorption of 3D Woven Green Composites", Environment, Development and Sustainability, Vol. , No. , (2025), pp.

Danish Mahmood Baitab, Adeel Abbas, Zain Ahmad Sumbal, Yasir Nawab, Muhammad Kashif Bangash, Muhammad Umair*, "Influence of Varying MicroFly Ash Filler Concentrations on the Mechanical Behavior of Flax-Reinforced Green Epoxy Composites", Mechanics of Composite Materials , Vol. , No. , (2025), pp.

Muhammad Mubeen Safdar, Muhammad Imran Khan, Maha Alsunbul, Eman Fayad, Zulfiqar Ahmad Rehan, Tehseen Ullah, HM Fayzan Shakir and Muhammad Umair*, "Effect of hybrid weaving patterns on mechanical performance of 3D woven structures", Polymers and Polymer Composites , Vol. , No. , (2024), pp.

Muhammad Umair, Muhammad Nadeem, Hafsa Jamshaid, "A Prospective comparison of materials and structures for the sports graduated compression socks", Journal of Testing and Evaluation , Vol. , No. , (2024), pp.

Anum Yaseen, Muhammad Umair*, Z.A. Rehan*, Eid H. Alosaimi, "Synthesis of catalyzed polyurethane films using varying content of isocyanates, glycols, and chain extenders", Results in Chemistry, Vol. , No. , (2024), pp.

Khubab Shaker, Adeel Abbas, Yasir Nawab, Muhammad Umair, Muhammad Imran Khan, Zakariya Zubair and Habib Awais, , "Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites", Journal of Engineered Fibers and Fabrics , Vol. 19, No. , (2024), pp.

Muhammad Umair, Ambar Shah, Sikandar Abbas, Hafsa Jamshaid, "Comparison of mechanical and comfort properties of natural fiber-based spacer fabrics for shoe insole", Mehran University Research Journal of Engineering and Technology, Vol. 43, No. 2, (2024), pp.2

Shengkai Liu, Luyao Wang, Amna Siddique, Muhammad Umair, Chongyang Shi, Xiaoyuan Pei, Siqi Lui, Yue Yin, Haiting Shi, Zhiwei Hu*, "Irradiation multi-scale damage and interface effects of 3D braided carbon fiber/epoxy composites subjected to high dose Ɣ-rays", Composite Part B: Engineering , Vol. , No. , (2024), pp.

Muhammad Imran Khan, Shahood uz Zaman, Danish Mehmood Baitab, Syed Talha Ali Hamdani, Yasir Nawab, Muhammad Umair* , "Stretch & recovery properties of combined and combination twill based woven fabrics", Textile Research Journal , Vol. , No. , (2024), pp.

Muhammad Ullah, Hamail Fiaz, Adeel Abbas, Khubab Shaker, Yasir Nawab, Muhammad Umair* , "Thermal Comfort and Mechanical Analysis of Vigorous Diamond and Diaper Weaves; Warp, Weft and Balanced Float Fabrics with Equal Thread Densities", International Journal of Thermal Sciences , Vol. , No. , (2024), pp.

Ahmed Habib, Umar Draz, Adeel Abbas, Khubab Shaker, Yasir Nawab, Abdel-Fattah M. Seyam, Muhammad Umair*, "Influence of Honeycomb Structures on Fluids Transmission and Heat Retention Properties; An Initiative Towards Stretchable Weaves", Journal of Industrial Textiles , Vol. , No. , (2024), pp.

Anum Yaseen, Muhammad Umair*, ZA Rehan, "Fabrication of Novel Polyurethane matrix-based Functional Composites with Enhanced Mechanical Performance", Results in Engineering , Vol. , No. , (2024), pp.

Adeel Abbas, Muhammad Umair, Habib Awais, Yasir Nawab, Muhammad Imran Khan, Muzzamal Hussain*, "In Situ Energy Absorption and Negative Poisson’s Ratio Behaviors of 3D Weft Knitted Auxetic Fabrics Under Variant Measurements", Journal of Industrial Textiles , Vol. , No. , (2024), pp.

Danish Mahmood Baitab, Adeel Abbas, Muhammad Bilal Rasool, Daniyal Suhail Baig, Khubab Shaker, Muhammad Umair* , "Thermal, Sensorial, and Mechanical Characterization of Hemp Woven Crepe Fabrics; Investigating Conventional Variants for Modern Applications", Journal of Industrial Textiles , Vol. , No. , (2024), pp.

Khubab Shaker, Muhammad Adnan, Yasir Nawab, Muhammad Umair, Madeha Jabbar, Amna Siddique* and Ahsan Ahmad, "Mechanical Performance of Glass/Epoxy Composites Loaded with Silane-Treated Aluminum Hydroxide Fillers", Polymers, Vol. 15, No. 17, (2023), pp.17

Muhammad Toqeer Riaz, Muhammad Imran Khan, Khubab Shaker, Yasir Nawab, Muhammad Umair*, "Effect of cellulosic material and weave design on comfort performance of woven fabrics", Journal of Natural Fibers, Vol. , No. , (2023), pp.

Tehseen Ullah, Muzzamal Hussain, Mumtaz Ali, Muhammad Umair*, "Auxetic behavior of 3D woven warp, weft, and bidirectional interlock structures", Journal of Natural Fibers, Vol. , No. , (2023), pp.

Tehseen Ullah, Muzzamal Hussain, Mumtaz Ali, Muhammad Umair*, "Impact performance of jute 3D woven auxetic reinforced thermoplastic (PC/PVB) composites", Journal of Reinforced Plastics and Composites, Vol. , No. , (2023), pp.

Raja Muhammad Waseem Ullah Khan, Yasir Nawab, Muhammad Mubeen Safdar, Muhammad Ayub Asghar, Muhammad Umair*, "Comparative geometrical analysis of In Situ mechanical performance of 2D woven In-plane auxetic structures", Journal of Testing and Evaluation, Vol. , No. , (2023), pp.

Raja Muhammad Waseem Ullah Khan, Muzzamal Hussain, Yasir Nawab, Muhammad Umair*, "Influence of tetrahedral architectures on fluid transmission and heat retention behaviors of auxetic weaves", Thermal Science and Engineering Progress, Vol. , No. , (2023), pp.

Adeel Abbas, Muhammad Umair, Muzzamal Hussain, Madeha Jabbar, Muhammad Imran Khan, Syeda Hafsa Hassan, Habib Awais*, , "Fluids Transmission and Thermal Durability Analysis of Miura-Ori Auxetic Relief Knits; The Next Generation Wearable Materials", Thermal Science and Engineering Progress , Vol. , No. , (2023), pp.

Danish Mahmood Baitab, Shagufta Riaz, Adeel Abbas, Shahood uz Zaman, Muhammad Zubair, Yasir Nawab, Muhammad Umair*, "Scaling Thermal and Mechanical Characteristics of Woven Honeycombs: A Novel Endeavor of Simultaneous Ridges and Picking Sequence Variation", International Journal of Thermal Sciences, Vol. , No. , (2023), pp.

Muhammad Mubeen Safdar, Muhammad Imran Khan, Tehseen Ullah, Khubab Shaker, Yasir Nawab, Zahid Rizwan, Muhammad Ayub Asghar, Muhammad Umair*, "Effect of fillers and weave architecture hybridization on the impact performance of 3D woven hybrid green composites", Polymer Composites , Vol. , No. , (2023), pp.

Madeha Jabbar, Noor Ul ain, Anaiza Qayyum, Amna Siddique, Muhammad Umair, Yasir Nawab, Khubab Shaker, "Bio-based Thermal Insulating Panels for Clothing using Domestic Parakeet Feathers as Filling: A Comparative Study", Biomass Conversion and Biorefinery , Vol. , No. , (2023), pp.

Ayesha Younis, Aima Sameen, Fatima Iftikhar, Muhammad Umair, Shagufta Riaz*, "Cellulose polyester bi‑layer functional fabric to develop pesticide‑resistant comfortable PPE", Polymer Bulletin , Vol. , No. , (2023), pp.

Farooq Rauf, Muhammad Umair, Khubab Shaker, Yasir Nawab, Tehseen Ullah, Sheraz Ahmad, , "Investigation of Chemical Treatments to Enhance the Mechanical Properties in Natural Fiber Composites", International Journal of Polymer Science , Vol. , No. , (2023), pp.

Tehseen Ullah, Muzzamal Hussain, Mumtaz Ali, Muhammad Umair*, "Impact of auxeticity on mechanical properties of 3D woven auxetic reinforced thermoplastic composites", Polymer Composites, Vol. , No. , (2022), pp.

Muhammad Umair, Ayesha Shahbaz, Ahsan Ahmad, Sohaib Arif, Khubab Shaker, Madeha Jabbar, Yasir Nawab* , "Optimization of flame retardancy & mechanical performance of jute-glass/epoxy hybrid composites", Fibers and Polymers, Vol. , No. , (2022), pp.

Shahood Uz Zaman, Salma Shahid, Khubab Shaker, Yasir Nawab, Muhammad Umair, Zubair Khaliq, Farooq Azam, Sheraz Ahmad, "Development and Characterization of chemical and fire resistant Jute/Unsaturated Polyester Composites", The Journal of the Textile Institute, Vol. , No. , (2022), pp.

Muhammad Umair, Muzzamal Hussain, Khubab Shaker, Yasir Nawab, "Impact performance of three-dimensional woven composites with novel binding yarn patterns", Journal of Natural Fibers, Vol. , No. , (2022), pp.

Ahsan Ahmad, Abdul Moeed, Asra Tariq, Yasir Nawab, Muhamamd Umer Farooq, Muhammad Umair* , "Effect of hybridization approach on mechanical performance of jute-hemp/epoxy hybrid composite laminates", Journal of Natural Fibers, Vol. , No. , (2022), pp.

Muhammad Umar Nazir, Muhammad Usman Javaid, Khubab Shaker, Yasir Nawab, Tanveer Hussain, Muhammad Umair*, "Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics", Research Journal of Textile and Apparel, Vol. , No. , (2022), pp.

Muhammad Umair, Muhammad Usman Javaid, Yasir Nawab, Madeha Jabbar, Shagufta Riaz, Hafiz Affan Abid, Khubab Shaker*, "Thermal properties of woven fabric as a function of its structural parameters: experimentation and modelling", Research Journal of Textile and Apparel, Vol. , No. , (2022), pp.

Sohaib Arif, Yasir Nawab, Khubab Shaker, Muhammad Umair*, "Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications", Journal of Industrial Textiles, Vol. , No. , (2022), pp.

Hassan Jamal, Faheem Ahmad, Farooq Azam, Muhammad Umair, Yasir Nawab, Abher Rasheed, Tehseen Ullah, Sheraz Ahmad, "Development and Characterization of Impact Resistant Fabric with Better Comfort for Motorbike Riders", The Journal of the Textile Institute, Vol. , No. , (2022), pp.

Xingzhong Gao, Muhammad Umair, Yasir Nawab, Zeeshan Latif, Sheraz Ahmad, Amna Siddique,* Hongyue Yang, "Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review", Polymers, Vol. , No. , (2022), pp.

Hassan Iftekhar, Muhammad Umair, Syed Talha Ali Hamdani, Syed Muhammad Imran, Muhammad Shahid Nazir, Zulfiqar Ali*, "Effect of hybrid weave patterns on the mechanical performance of woven fabrics", Journal of Natural Fibers , Vol. , No. , (2022), pp.

Muhammad Imran Khan, Muhammad Umair, Rizwan Hussain, Yasir Nawab*, "Effect of shear thickening fluid on mechanical properties of para-aramid fabrics", The Journal of the Textile Institute, Vol. , No. , (2022), pp.

Khubab Shaker, Maheer Arif, Yasir Nawab, Muhammad Umair, "Performance assessment of composites from post-consumer and post industrial denim waste", Journal of Textile & Apparel Technology & Management , Vol. 12, No. , (2022), pp.

Muhammad Imran Khan, Muhammad Umair, Rizwan Hussain, and Yasir Nawab, "Effect of Micro-fillers on the Performance of Thermoplastic Para Aramid Composites for Impact Applications", Fibers and Polymer , Vol. , No. , (2021), pp.

Shagufta Riaz, Munir Ashraf, Humera Aziz, Ayesha Younus, Muhammad Umair, Abdul Salam, Kashif Iqbal, Muhammad Tahir Hussain, Tanveer Hussain,, "Cationization of TiO2 nanoparticles to develop highly durable multifunctional cotton fabric", Material Chemistry and Physics , Vol. , No. , (2021), pp.

Muzzamal Hussain, Sohaib Arif, Yasir Nawab, Khubab Shaker, Muhammad Umair*, "Development of functional (flame-retardant and anti-bacterial) and hybrid (carbon-glass/epoxy) composites with improved low velocity impact response", Polymer Composites , Vol. , No. , (2021), pp.

Muhammad Imran Khan, Muhammad Umair, Mehmet Karahan, Yasir Nawab* and Rizwan Hussain , "Investigation of impact properties of para-aramid composites made with thermoplastic-thermoset blend", Journal of Thermoplastic Composite Materials , Vol. , No. , (2021), pp.

Madeha Jabbar, Khubab Shaker, Yasir Nawab, Muhammad Umair, "Effect of the stuffer yarns on the mechanical performance of Novel 3D woven green composites", Composite Structures, Vol. , No. , (2021), pp.

Muhammad Nauman Hameed, Yasir Nawab, Muhammad Zubair, Muhammad Umair, Zuhaib Ahmad, Khubab Shaker, "Double face fabrics: a tailorable solution for puncture resistant application", The Journal of the Textile Institute, Vol. , No. , (2021), pp.

Muhammad Umar Nazir, Khubab Shaker, Yasir Nawab, Syed Talha Ali Hamdani, Hafiz Muhammad Abdullah, Muhammad Umair*, "Thermo-physiological comfort of woven fabrics made from different cellulosic yarns", Journal of Natural Fibers, Vol. , No. , (2021), pp.

Muhammad Umair, Muzzamal Hussain, Zaheer Abbas, Khubab Shaker, Yasir Nawab, "Effect of Weave Architecture and Glass Microspheres Percentage on the Low Velocity Impact Response of Hemp/Green Epoxy Composites", Journal of Composite Materials, Vol. , No. , (2021), pp.

Khubab Shaker, Muhammad Umair, Salma Shahid, Madeha Jabbar, Raja Muhammad Waseem Ullah Khan, Muhammad Zeeshan, Yasir Nawab, "Cellulosic Fillers Extracted from Argyreia Speciose Waste: A Potential Reinforcement for Composites to Enhance Properties", Journal of Natural Fibers, Vol. , No. , (2021), pp.

Ghulam Ali Bajwa, Muhammad Umair, Yasir Nawab, Zahid Rizwan, "Morphometry of Leaf and Shoot for Assessing Above-Ground Biomass Structure and Carbon Sequestration by White Mulberry (Morus alba L.)", Journal of Forestry Research, Vol. , No. , (2021), pp.

Muhammad Umair, Syed Talha Ali Hamdani, Muzzamal Hussain, Yasir Nawab*, "Mechanical Performance of 3D Woven Jute/Green Epoxy Composites with Novel Weaving Patterns", Journal of Industrial Textiles , Vol. , No. , (2021), pp.

Khubab Shaker, Muhammad Umair, Syed Talha Ali Hamdani, Yasir Nawab*, "Effect of fabric structure on the performance of 3D woven pressure sensor", Fibers and Polymers , Vol. , No. , (2021), pp.

Khubab Shaker, Raja Muhammad Waseem Ullah Khan, Madeha Jabbar, Muhammad Umair, Asra Tariq, Muhammad Kashif, Yasir Nawab*, "Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber", Industrial Crops and Products, Vol. 152, No. , (2020), pp.

Hassan Iftekhar, Raja Muhammad Waseem Ullah Khan, Muhammad Ayub Asghar, Abdul Qadeer, Muhammad Umair, Yasir Nawab and Syed Talha Ali Hamdani, "Study of comfort performance of novel car seat design for long drive", Journal of Automobile Engineering , Vol. 234, No. 2-3, (2020), pp.2-3

Muhammad Imran Khan, Muhammad Umair, Khubab Shaker, Abdul Basit, Yasir Nawab, Muhammad Kashif , "Impact of waste fibers on the mechanical performance of concrete composites", Journal of the Textile Institute , Vol. , No. , (2020), pp.

Usman Ahmed, Asra Tariq, Yasir Nawab, Khubab Shaker, Zubair Khaliq, Muhammad Umair* , "Comparison of mechanical behavior of biaxial, unidirectional and standard woven fabric reinforced composites", Fibers and Polymers , Vol. 21, No. 6, (2020), pp.6

Muhammad Umair, Khubab Shaker, Muhammad Usman Javaid, Muzzamal Hussain, Muhammad Kashif, Yasir Nawab* , "Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements", Mechanics of Advanced Materials and Structures, Vol. , No. , (2020), pp.

Zaheer Abbas, Salma Shahid, Yasir Nawab, Khubab Shaker, Muhammad Umair*, "Effect of glass microspheres and fabric weave structure on mechanical performance of hemp/green epoxy composites", Polymer Composites , Vol. , No. , (2020), pp.

Hassan Iftekhar, Muhammad Umair, Yasir Nawab, Syed Talha Ali Hamdani, "Development of 3D Auxetic Structures using Para-Aramid and Ultra-High Molecular Weight Polyethylene Yarns", The Journal of the Textile Institute, Vol. , No. , (2020), pp.

Muhammad Umair, Syed Talha Ali Hamdani, Yasir Nawab, Muhammad Ayub Asghar, Tanveer Hussain , "Compression and recovery behaviour of 3D woven spacer composites", Journal of Industrial Textiles , Vol. , No. , (2019), pp.

Ghulam Ali Bajwa, Yasir Nawab, Muhammad Umair, Zahid Rizwan, "Techno-mechanical properties of cocoon, raw silk and filament of two mulberry silkworm (Bombyx mori L.) strains", Materials Science & Engineering Technology , Vol. 50, No. , (2019), pp.

Muhammad Umair, Syed Talha Ali Hamdani, Yasir Nawab, Muhammad Ayub Asgghar, Tanveer Hussain, Abdelghani Saouab, "Effect of Pile Height on the Mechanical Properties of 3D Woven Spacer Composites", Fibers and Polymers , Vol. 20, No. 6, (2019), pp.6

Muhammad Imran Khan, Jehanzeb Akram, Muhammad Umair, Syed Talha Ali Hamdani, Khubab Shaker, Yasir Nawab, Muhammad Zeeshan, "Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity", Journal of Industrial Textiles , Vol. 49, No. 5, (2019), pp.5

Yasir Nawab, Kuhammad Kashif, Muhammad Ayub Asghar, Ali Asghar, Muhammad Umair, Khubab Shaker, Muhammad Zeeshan, "Development & Characterization of Green Composites using Novel 3D Woven Preforms", Applied Composite Materials, Vol. , No. , (2018), pp.

Muhammad Umair, Syed Talha Ali Hamdani, Muhammad Ayub Asghar, Tanveer Hussain, Mehmet Karahan, Yasir Nawab, Mumtaz Ali, "Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites", Journal of Reinforced Plastics and Composites, Vol. 37, No. 7, (2018), pp.7

Zaid Masood, Sheraz Ahmad, Muhammad Umair, Khubab Shaker, Yasir Nawab, Mehmet Karahan, "Mechanical behaviour of hybrid composites developed from textile waste", Fibres and Textiles in Eastern Europe, Vol. 26, No. 1, (2018), pp.1

Khubab Shaker, Muhammad Umair, Madeha Jabbar, Danish Mahmood Baitab, Yasir Nawab, Ali Afzal, Sheraz Ahmad , "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. , No. , (2018), pp.

Muhammad Kashif, Syed Talha Ali Hamdani,Yasir Nawab, Muhammad Ayub Asghar, Muhammad Umair, Khubab Shaker, "Optimization of 3D woven preform for improved mechanical performance", Journal of Industrial Textiles, Vol. , No. , (2018), pp.

Adeela Nasreen, Muhammad Umair, Khubab Shaker, Syed Talha Ali Hamdani, Yasir Nawab, "Development and characterization of three-dimensional woven fabric for ultra violet protection", International Journal of Clothing Science and Technology, Vol. , No. , (2018), pp.

Muhammad Usman Javaid, Jiri Militky, Jakub Weiner, Jana Salakova, Abdul Jabbar, Muhammad Umair, "Effect of surface modification and knife penetration angle on the Quasi-Static Knife Penetration Resistance of para-aramid fabrics", The Journal of The Textile Institute�, Vol. , No. , (2018), pp.

Aisha Rehman, Madeha Jabbar, Muhammad Umair, Yasir Nawab, Mariam Jabbar, Khubab Shaker , "A study on the interdependence of fabric pore size and its mechanical and comfort properties", Journal of Natural Fibers , Vol. , No. , (2018), pp.

Waqas Ashraf, Yasir Nawab, Muhammad Umair, Khubab Shaker, Mehmat Karahan , "Investigation of mechanical behvior of woven/knitted hybrid composites", Journal of the Textile Institute , Vol. 108, No. 9, (2017), pp.9

Muhammad Maqsood, Muhammad Imran Khan, Khubab Shaker, Muhammad Umair, Yasir Nawab, "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", Journal of theTextile Institute , Vol. 108, No. 1, (2017), pp.1

Muhammad Maqsood, Yasir Nawab, Jawairia Umar, Muhammad Umair, Khubab Shaker, , "Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garment", Journal of Textile Institute, Vol. 108, No. 4, (2017), pp.4

Muhammad Umar Nazir, Khubab Shaker, Sheraz Ahmed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, "Investigating the mechanical behavior of composites made from textile industry waste", The Journal of the Textile Institute, Vol. 108, No. 5, (2017), pp.5

Muhammad Umar Nazir, Khubab Shaker, Yasir Nawab, Muhammad Imran Khan, Zohaib Fazal, Muhammad Umair, "Investigating the effect of material and weave design on the comfort properties of bilayer woevn fabrics", Journal of the Textile Institute, Vol. 108, No. 8, (2017), pp.8

Muhammad Umair, Khubab Shaker, Naseer Ahmad, Muzzamal Hussain, Madeha Jabbar, Yasir Nawab, "Simultaneous optimization of woven fabric properties using principal component analysis", Journal of Natural Fibers , Vol. 14, No. 6, (2017), pp.6

Muhammad Umair, Khubab Shaker, Yasir Nawab, Abher Rasheed, Sheraz Ahmad , "A Study on the Twist Loss in Weft Yarn During Air Jet Weaving", Journal of Engineered Fibers and Fabrics , Vol. 12, No. 4, (2017), pp.4

Madeha Jabbar, Khubab Shaker, Muhammad Umair Yasir Nawab, "Optimizing the performance of woven protective gloves using grey relational analysis", Journal of the Textile Institute, Vol. 108, No. 10, (2017), pp.10

Adeel Zulifqar, Khubab Shaker, Yasir Nawab, Muhammad Umair, Danish Mahmood Baitab, Muhammad Maqsood, "Investigation of multi-layered woven car seatbelts with optimum performance", Industria Textila, Vol. 68, No. 2, (2017), pp.2

Sheraz Ahmad, Munir Ashraf, Azam Ali, Khubab Shaker, Muhammad Umair, Ali Afzal, Yasir Nawab, Abher Rasheed, "Preparation of conductive polyethylene terephthalate yarns by deposition of silver & copper nanoparticles", Fibres and Textiles in Eastern Europe , Vol. 25, No. 125, (2017), pp.125

Muhammad Maqsood, Yasir Nawab, Syed Talha Ali Hamdani, Khubab Shaker, Muhammad Umair, Waqas Ashraf, "Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns", Journal of The Textile Institute , Vol. 107, No. 7, (2016), pp.7

Muhammad Umair, Tanveer Hussain, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Madeha Jabbar , "Effect of woven fabric structure on the air permeability and moisture management properties", Journal of The Textile Institute , Vol. 107, No. 5, (2016), pp.5

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid, "Modelling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex research journal , Vol. 16, No. 3, (2016), pp.3

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair , "Prediction of Warp and Weft Yarn Crimp in Cotton Woven Fabrics", Journal of The Textile Institute, Vol. 106, No. 11, (2015), pp.11

Khubab Shaker, Yasir Nawab,Muhammad Usman Javaid, Muhammad Umair, Muhammad Maqsood, "Development of 3d woven fabric based pressure switch", Autex Research Journal , Vol. 15, No. 2, (2015), pp.2

Khubab Shaker, Muhammad Umair, Muhammad Maqsood, Yasir Nawab, Sheraz Ahmed, Abher Rasheed, Munir Ashraf, Abdul Basit , "A statistical approach for obtaining the controlled woven fabric width.", Autex Research Journal , Vol. 15, No. 4, (2015), pp.4

Azam Ali, Khubab Shaker, Yasir Nawab, Munir Ashraf, Abdul Basit, Salma Shahid, Muhammad Umair , "Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material", Journal of Reinforced Plastics and Composites , Vol. 34, No. 24, (2015), pp.24

Muhammad Umair, Yasir Nawab, Mumtaz Hasan Malik, Khubab Shaker , "Development and characterization of three-dimensional woven-shaped preforms and their associated composites", Journal of Reinforced Plastics and Composites , Vol. 34, No. 24, (2015), pp.24

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javaid, Khubab Shaker, Muhammad Umair , "Development of Seersucker Fabrics using Single Warp Beam and Modeling of their Stretch-Recovery Behavior", Journal of The Textile Institute , Vol. 106, No. 11, (2015), pp.11

Muhammad Umair, Tehseen Ullah, Khubab Shaker, Muzzamal Hussain, Yasir Nawab, "Nano-Clay based Novel 3D Woven Hemp/Green Epoxy Composites", South East Asia-Japan Conference on Composite Materials (SEAJCCM-2024), Venue: Royale Chulan Hotel Kuala Lumpur-Malaysia under the University Technology Malaysia (13-15 August-2024), (2024)

Muhammad Umair, Muzzamal Hussain, Sajjad Ahmad Baig, Tehseen Ullah, "Innovative Reinforcement Strategies for Enhances Performance of Natural Fiber-Reinforced Polymer Composites", 3rd International Conference on Knowledge Based Textiles (ICKT-2024) on 5-6 March, 2024, Venue: National Textile University, Faisalabad-Pakistan, (2024)

Muhammad Imran Khan, Muhammad Umair, Yasir Nawab, "Development of Lightweight Protective Armours", 3rd International Conference on Knowledge Based Textiles (ICKT-2024) on 5-6 March, 2024 , Venue: National Textile University, Faisalabad-Pakistan, (2024)

Muhammad Umair, Tehseen Ullah, Yasir Nawab, Muzzamal Hussain, Muhammad Ayub Asghar, Khubab Shaker, Muhammad Imran Khan, "3D Woven Composites for Ballistic Applications ", 3rd International Conference on Knowledge-based Textiles (ICKT-2024) 5-6 March 2024, Venue: National Textile University, Faisalabad, Pakistan, (2024)

Habib Awais, Adeel Abbas, Muhammad Umair, Muzzamal Hussain, "Potential of Weft Knitted Auxetic Materials in Size Changing Clothing and Protective Application; A Systematic Review", 2nd International Conference on Knowledge Based Textiles (ICKT-2023) and 7th Conference on Value Addition and Innovation in Textiles (COVITEX 2023), Venue: National Textile University, Faisalabad, (2023)

Development and Characterization of 2D Woven Auxetic Fabrics by Combination of Hybrid Weave Designs, "Raja Muhammad Waseem Ullah Khan, Yasir Nawab, Muhammad Mubeen Safdar, Muhammad Umair", 2nd International Conference on Knowledge Based Textiles (ICKT-2023) and 7th Conference on Value Addition and Innovation in Textiles (COVITEX 2023), Venue: National Textile University, Faisalabad, (2023)

An Investigation of The Interaction Between Auxeticity and Mechanical Properties of Natural Fiber-Based 3D Structures, "Tehseen Ullah, Muzzamal Hussain, Mumtaz Ali, Muhammad Umair", 2nd International Conference on Knowledge Based Textiles (ICKT-2023) and 7th Conference on Value Addition and Innovation in Textiles (COVITEX 2023), Venue: National Textile University, Faisalabad, (2023)

Weft-Knitted Auxetic Fabrics: A Performance-Properties Study, "Adeel Abbas, Habib Awais, Muhammad Umair, Madeha Jabbar", 2nd International Conference on Knowledge Based Textiles (ICKT-2023) and 7th Conference on Value Addition and Innovation in Textiles (COVITEX 2023), Venue: National Textile University, Faisalabad, (2023)

Raja Muhammad Waseem Ullah Khan, Muzzamal Hussain, Muhammad Umair, Yasir Nawab, "Effect of Weave Structure on the Auxeticity and Comfort Properties of 2D Woven Structures", 6th International Conference on natural Fibers (ICNF_2023) on 19-21 June 2023, Venue: Funchal, Madeira, Portugal, (2023)

Raja Muhammad Waseem Ullah Khan, Muzzamal Hussain, Muhammad Umair, Yasir Nawab, "Effect of Weave Structure on the Auxeticity and Comfort Properties of 2D Woven Structures", 6th International Conference on natural Fibers (ICNF_2023) on 19-21 June 2023, at Funchal, Madeira, Portugal, Venue: Funchal, Madeira, Portugal, (2023)

Anum Yaseen, Muhammad Umair, Z. A. Rehan , "Synthesis and Application of Novel Polyurethane Film for Material Coatings", 2nd International Conference on Polymers and Composites (ICPC-2021) , Venue: National Textile University (Online), Faisalabad-Pakistan, (2022)

Tehseen Ullah, Muzzamal Hussain, Mumtaz Ali, Muhammad Umair*, "An Analysis of The Mechanical Behavior of 3D Woven Warps, Wefts, And Bidirectional Interlock Structures as Reinforcement for Impact Applications", 2nd International Conference on Polymers and Composites (ICPC-2021) , Venue: National Textile University (Online), Faisalabad-Pakistan, (2022)

Raja Muhammad Waseem Ullah Khan, Yasir Nawab, Muhammad Umair*, "Development and characterization of woven hybrid weave design based auxetic fabrics for trouser, T-shirt and maternity belt", Knowledge Based Textile (KnowTex-2022), Venue: 01 March 2022 at National Textile University, Faisalabad-Pakistan. , (2022)

Usman Ahmed, Yasir Nawab, Muhammad Umair, Ali Raza , "Development of Light Weight and Flexible Neck Guard Fabric for Ice Hockey Players", 4th International Textile Conference , Venue: NED University of Engineering and Technology, Karachi (2-3rd March 2021), (2021)

Muhammad Umair, Abdul Moeed, Ahsan Ahmad, Asra Tariq, Yasir Nawab, "Mechanical Performance of Jute-Hemp/Epoxy Hybrid Composites for Furniture Applications", International Conference on Sugar Palm and Allied Fibre Polymer Composites (SAPC-2021), Venue: Universiti Putra Malaysia, Serdang (Online), Malaysia (11 December 2021), (2021)

Muhammad Imran Khan, Yasir Nawab, Muhammad Umair, Khubab Shaker, "The Effect of Denim Waste on the Mechanical Properties of the Fiber Reinforce Concrete and Mortar", International Conference on Sugar Palm and Allied Fibre Polymer Composites (SAPC-2021) , Venue: Universiti Putra Malaysia, Serdang (Online), Malaysia (11 December 2021 ), (2021)

Maheer Arif, Khubab Shaker, Muhammad Umair, Yasir Nawab, "Waste to value: Approach for sustainable future", International Conference on Sugar Palm and Allied Fibre Polymer Composites (SAPC-2021) , Venue: Universiti Putra Malaysia, Serdang (Online), Malaysia (11 December 2021 ), (2021)

Muhammad Umair, Tehseen Ullah, Yasir Nawab, Khubab Shaker, "3D Woven Hybrid Composite Based Panels with Improved Mechanical Performance for Bullet Protection in Vehicles", 1st International Conference on Polymers and Composites (ICPC-2021), Venue: National Textile University (Online), Faisalabad-Pakistan (7-8 December 2021), (2021)

Muzzamal Hussain, Yasir Nawab, Abdellatif Imad, Abdelghani Saouab, Muhammad Umair, "Effect of Different Reinforcement Materials and Matrix on Delamination Characteristic of Metal Composite Bond", 1st International Conference on Polymers and Composites (ICPC-2021), Venue: National Textile University (Online), Faisalabad-Pakistan (7-8 December 2021), (2021)

Usman Ahmed, Yasir Nawab, Ali Afzal, Muhammad Umair, Hifza Kahlid, "Improvement in the Comfort Properties of Gloves for Fighter Jet Pilots", 9th International Conference of Applied Research on Textile and Materials (CIRATM-9), Venue: 12-13, 2021, Monastir, Tunisia, (2021)

Adeela Nasreen, Muhammad Umair, Raja Waseem, Kashif Bangash, Yasir Nawab, "Development and Characterization of Thermoplastic Composites Using Novel Commingled Weaving Technique", Textile Nexus 2021 Proceedings an International Conference to Mobilize Industry-Academia Connectivity, Venue: Department of Textile Engineering, Mehran University of Engineering and Technology, Jamshoro-Pakistan (9-10 June, 2021) , (2021)

Usman Ahmed, Yasir Nawab, Muhammad Umair, Ali Raza, "Development of Light Weight and Flexible Neck Guard Fabric for Ice Hockey Players", 4th International Textile Conference , Venue: NED University of Engineering and Technology, Karachi, (2020)

Muhammad Umair, Muhammad Umar Nazir, Khubab Shaker, Muhammad Usman Javaid , "Comparison of Thermo-Physiological Comfort Properties of Cellulosic based Woven Fabrics", 2nd International Conference on Technical Textiles (ICTT 2020) , Venue: National Textile University, Faisalabad-Pakistan, (2020)

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Ayub Asghar, Muhammad Kashif, "Joint-less 3D Shaped Woven Fabrics with improved Peel Strength", 2nd International Conference on Technical Textiles (ICTT 2020), Venue: National Textile University Faisalabad-Pakistan, (2020)

Khubab Shaker, Yasir Nawab, Muhammad Umair, "Prediction of Air Permeability using Fabric Geometrical Parameters", 2nd International Conference on Technical Textiles (ICTT 2020) , Venue: National Textile University, Faisalabad, Pakistan , (2020)

Khubab Shaker, Yasir Nawab, Muhammad Umair, "An Approach to Approximate the Fluid Flow Through Reinforcement", 2nd International Conference on Technical Textiles (ICTT 2020) , Venue: National Textile University, Faisalabad, Pakistan, (2020)

Zahid Rizwan, Yasir Nawab, Muhammad Umair, Ghulam Ali Bajwa , "Quantitative Manifestation of Techno mechanical Traits of Cocoon Filament of Mulberry Silkworm (Bombyx mori) strains", 2nd International Conference on Technical Textiles (ICTT 2020) , Venue: National Textile University, Faisalabad-Pakistan., (2020)

Khubab Shaker, Yasir Nawab, Muhammad Umair, "Status of Composite Materials Industry in Pakistan: Challenges and opportunities", Conference on Emerging Materials and Processes (CEMP) , Venue: National center of Physics Islamabad, Pakistan, (2019)

Muhammad Umair, Syed Talha Ali Hamdani, Yasir Nawab, Muhammad Ayub Asghar, Tanveer Hussain , "Mechanical behavior of 3D woven spacer fabric reinforced composites", 5th International Conference on Value Addition and Innovation in Textiles (COVITEX 2019), Venue: National textile University Faisalabad-Pakistan, (2019)

Muhammad Zeeshan, Yasir Nawab, Khubab Shaker, Muhammad Umair, Muhammad Kashif , "Mechanical Characterization of Economical, Waste Based Hybrid Composites for Automotive Applications", 1st International Conference on Advances in Engineering & Technology (ICAET), Venue: BUITEMS, Quetta , (2018)

Yasir Nawab, Muhammad Kashif, Muhammad Ayub Asghar, Ali Asghar, Muhammad Umair, Khubab Shaker, Muhammad Zeeshan , "Development & Characterization of Green Composites Using Novel 3D Woven Preforms", The 8th World Conference on 3D Fabrics and Their Applications , Venue: The University of Manchester, Manchester, UK, (2018)

Waqas Ashraf, Yasir Nawab, Muhammad Umair, "Investigation of impact strength of woven/knitted hybrid laminated composites", 13th IBCAST International Bhurban Conference on Applied Sciences & Technology , Venue: Islamabad � Pakistan., (2016)

Muhammad Maqsood ,Yasir Nawab, Haritham Khan, Khubab Shaker, Muhammad Umair , "Effect of weave structure and fabric thread density on barrier effectiveness of woven surgical gowns ", MedTex 13-15 May Lodz Poland., Venue: Poland, (2015)

Khubab Shaker, Munir Ashraf, Yasir Nawab, Madeha Jabbar, Muhammad Umair, Azam Ali, "Development of natural fiber reinforced functional composites", COVITEX 27-28 March 2015, Faisalabad-Pakistan, Venue: Faisalabad, (2015)

Muhammad Umair, Yasir Nawab, Mumtaz Hasan Malik, Muhammad Maqsood, Jasim Zia, "Study of jointless shaped woven composites", 12th IBCAST (International Bhurban Conference on Applied Sciences & Technology), Venue: Islamabad, (2015)

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulifqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", 14th Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Khubab Shaker, Yasir Nawab, Muhammad Umair, AdeelZulfiqar, Muhammad Maqsood, Danish Mehmood Baitab,, "Finite Element Modelling of Resin Flow in Woven Reinforcement for Composites Using Resin Transfer Moulding", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Muhammad Umair, Yasir Nawab, Khubab Shaker, Muhammad Maqsood,, "3D shaped woven structures for structural composite applications", First International Young Engineers Convention, Venue: Lahore � Pakistan, (2014)

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", 14th Autex World Textile Conference, Venue: Bursa � Turkey, (2014)

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", 14th Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Novel 3D woven hybrid composite-based bullet protection for vehicles

Awarding Body: Higher Education Commission of Pakistan under National Research Program for Universities (NRPU-12477) (PI)
Awarding Year: 2021
Amount: 14

Enhancement of global competitiveness of Pakistani textile export value-chains by capacity building and product diversification (KnowTex)

Awarding Body: Higher Education Commission of Pakistan under Grand Challenge Fund (GCF-63) (Co-PI)
Awarding Year: 2021
Amount: 207

Functional, light weight, durable and high strength detachable composite furniture for indoor and outdoor use

Awarding Body: Higher Education Commission of Pakistan under Technology Development Fund (TDF03-112) (PI)
Awarding Year: 2019
Amount: 14

"Method of manufacturing of balanced 3D bidirectional interlock woven structure" (Muhammad Umair, Yasir Nawab, Muhammad Ayub Asghar, Syed Talha Ali Hamdani, Tanveer Hussain)

Patent # 144198, IPO Pakistan   (2024)

Top 2% Scientist in the World for the Year 2024

Elsevier and Stanford University  (2024)