Dr. Danish Mahmood Baitab

Dr. Danish Mahmood Baitab

Dr. Danish Mahmood Baitab

Assistant Professor

  •  Address: Sheikhupura Road, Faisalabad - 37610, Pakistan
  •  Phone: +92-41-9230081-85 Ext: 291
  •  Mobile: 0345-5406123
  •  Fax: +92-41-9230098
  •  Email: danish68@ntu.edu.pk / danishbaitab@gmail.com
  • No. of Journal Publications: 9
  • No. of Conference Papers: 6



  1. PHD is in Aerospace Engineering
    University Putra, Malaysia  (2021)
  2. MS Advance Materials
    National Textile University, Faisalabad, Pakistan  (2016)
  3. B.Sc Textile Engineering ( Fabric Manufacturing )
    National Textile University Faisalabad, Pakistan  (2012)

  1. Assistant Professor
    National Textile University, Faisalabad (28 June, 2022 till now)

  2. Lecturer
    National Textile University Faisalabad (15 November, 2012 to 27 June, 2022)


2023

1

Danish Mahmood Baitab, Shagufta Riaz, Adeel Abbas, Shahood uz Zaman, Muhammad Zubair, Yasir Nawab, Muhammad Umair, "Scaling thermal and mechanical characteristics of woven honeycombs: A novel endeavor of simultaneous ridges and picking sequence variation", International Journal of Thermal Sciences, Vol. 194, No. , (2023), pp.

2022

2

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, Leong S Jang, Ishan Mitra Halder, "Flutter performance of shape memory alloy-embedded 3D woven flexible composite plate under subsonic flow", Journal of Industrial Textiles, Vol. , No. , (2022), pp.

2021

3

Husam Yahya Imran, Dayang Laila Abang Abdul Majid, Saleem Ethaib, Danish Mahmood Baitab and Leong Shii Jang, "Utilization of Shape Memory Alloy (SMA) for Temperature Detection and Warning in an Automobile Engine", IOP Conference Series: Materials Science and Engineering, Vol. 1058, No. , (2021), pp.

2020

4

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, "Tensile behavior of multilayer 3D smart woven composites embedded with shape memory alloy (SMA) wires", Journal of Materials Research and Technology (JMR&T), Vol. 9, No. 5, (2020), pp.5

2019

5

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, "Improving the stiffness of multilayer 3D woven composites by the integration of shape memory alloys (SMAs) into structures", The Journal of The Textile Institute, Vol. 111, No. 9, (2019), pp.9

6

Khubaib Shaker, Muhammad Umair, Madeha Jabbar, Danish Mahmood Baitab, Yasir Nawab, Ali Afzal, Sheraz Ahmad, "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. 23, No. 5, (2019), pp.5

2018

7

Danish Mahmood Baitab, Dayang Laila Abdul Majid, Ermira Junita Abdullah, Faisal Abdul Hamid, "A review of techniques for embedding shape memory alloy (SMA) wires in smart woven composites", International Journal of Engineering & Technology, Vol. 7, No. 4, (2018), pp.4

2017

8

Adeel Zulifqar, Khubab Shaker, Yasir Nawab, Muhammad Umair, Danish Mahmood Baitab, Muhammad Maqsood , "Investigation of multi-layered woven car seat belts with optimum performance", Industria Textila , Vol. , No. , (2017), pp.

2015

9

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Munir Ashraf, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Salma Shahid, "Modelling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex research journal , Vol. , No. , (2015), pp.


2019

1

Danish Mahmood Baitab, Dayang Laila Abang Haji Abdul Majid, Ermira Junita Abdullah, Mohd Faisal Abdul Hamid, "Tensile behavior of multilayer 3D smart woven composites embedded with shape memory alloy (SMA) wires", 22nd International Conference a Composite Structures and 1st Chinese Conference on Composite Structures (ICCS22 & CCCS1), Venue: Wuhan, China, (2019)

2018

2

Danish Mahmood Baitab, Dayang Laila Abang Haji Abdul Majid, Ermira Junita Abdullah, Mohd Faisal Abdul Hamid, "A review of techniques for embedding shape memory alloy (SMA) wires in smart woven composites", Aerotech Conference 7th (Aerotech VII) Sustainability in Aerospace Engineering and Technology, Venue: Putrajaya, Malaysia, (2018)

2014

3

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Danish Mahmood, Adeel Zulfiqar, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

4

Khubab Shaker, Yasir Nawab, Muhammad Umair, Adeel Zulfiqar, Muhammad Maqsood, Danish Mahmood Baitab, "Finite element modelling of resin flow in woven reinforcement for composites using resin transfer molding", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

5

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mahmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

6

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mahmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)


Book Title Subject Published Year Publisher
Comprehensive Materials Processing, 2e 3D textile composites and their structural applications 2022 Elsevier
Encyclopedia of Materials: Composites Tensile Properties of Woven Intra-Ply Carbon/Kevlar Reinforced Epoxy Hybrid Composite at Sub-Ambient Temperature 2019 Elsevier
Structural Textile Design; Interlacing and Interlooping Textile Structures for Jacquard Weaving 2017 CRC Press, Taylor & Francis, USA
Fabric Manufacturing Calculations Process and Product Sizing Calculations 2017 Higher Education Commission, Pakistan

2014

1 Bachelor Comparison of different interlocking structures of 3D woven fabrics
1
Gold Medal
National Textile University  (2012)

Registered Engineer
Pakistan Engineering Council

homescontents