Muhammad Toqeer Riaz, Muhammad Imran Khan, Khubab Shaker, Yasir Nawab, Muhammad Umair, "Effect of Cellulosic Material and Weave Design on Comfort Performance of Woven Fabrics", Journal of Natural Fibers, Vol. 20, No. 1, (2023), pp.1

Muhammad Umar Nazir, Muhammad Usman Javaid, Khubab Shaker, Yasir Nawab, Tanveer Hussain, Muhammad Umair, "Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics", Research Journal of Textile and Apparel, Vol. , No. , (2023), pp.

Sohaib Arif, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications", Journal of Industrial Textiles, Vol. 51, No. 4_suppl, (2023), pp.4_suppl

Adeela Nasreen, Muhammad Kashif Bangash, Khubab Shaker, Yasir Nawab, "Effect of Surface Treatment on Stiffness and Damping Behavior of Metal-Metal and Composite-Metal Adhesive Joints", Polymers, Vol. 5, No. 2, (2023), pp.2

M Umair, MU Javaid, Y Nawab, M Jabbar, S Riaz, HA Abid, K Shaker, "Thermal properties of woven fabric as a function of its structural parameters: experimentation and modeling", Research Journal of Textile and Apparel, Vol. , No. , (2022), pp.

Shahood Zaman, Salma Shahid, Khubab Shaker, Yasir Nawab, Sheraz Ahmad, Muhammad Umair, Zubair Khaliq, Farooq Azam, "Characterization of chemical and fire resistant Jute/Unsaturated Polyester Composites", The Journal of The Textile Institute , Vol. 113, No. 3, (2022), pp.3

Muhammad Nauman Hameed, Yasir Nawab, Muhammad Zubair, Muhammad Umair, Zuhaib Ahmad, Khubab Shaker, "Double face fabrics: a tailorable solution for puncture resistant applications", The Journal of The Textile Institute , Vol. 113, No. 6, (2022), pp.6

Muhammad Umar Nazir, Khubab Shaker, Yasir Nawab, Syed Talha Ali Hamdani, Muhammad Umair, "Thermo-physiological comfort of woven fabrics made from different cellulosic yarns", Journal of Natural Fibers, Vol. 19, No. 11, (2022), pp.11

Khubab Shaker; Muhammad Umair; Raja Muhammad Waseem ullah Khan; Muhammad Zeeshan; Madeha Jabbar; Yasir Nawab, "Cellulosic fillers extracted from Argyreia speciose waste: a potential reinforcement for composites to enhance properties", Journal of Natural Fibers, Vol. 19, No. 11, (2022), pp.11

RA Ilyas, SM Sapuan, Emin Bayraktar, Shukur Abu Hassan, Nabil Hayeemasae, MSN Atikah, Khubab Shaker, "Fibre-Reinforced Polymer Composites: Mechanical Properties and Applications", Polymers, Vol. 14, No. 18, (2022), pp.18

M Umair, K Shaker, MU Javaid, M Hussain, M Kashif, Y Nawab, "Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements", Mechanics of Advanced Materials and Structures, Vol. 29, No. 1, (2022), pp.1

M Arif, Y Nawab, M Umair, K Shaker, "Performance Assessment of Composites from Post-consumer and Post-industrial Denim Waste", Journal of Textile & Apparel Technology & Management (JTATM, Vol. 12, No. Special Issue, (2022), pp.Special Issue

M Hussain, S Arif, Y Nawab, K Shaker, M Umair, "Development of functional (flame‐retardant and anti‐bacterial) and hybrid (carbon‐glass/epoxy) composites with improved low velocity impact response", Polymer Composites, Vol. 43, No. 2, (2022), pp.2

Muhammad Sohaib Anas, Habib Awais, Syed Talha Ali Hamdani, Khubab Shaker, Zeeshan Azam, Yasir Nawab, "Investigating the Thermo-Physiological Comfort Properties of Weft-Knitted Smart Structures Having a Negative Poisson’s Ratio", Advances in Materials Science and Engineering, Vol. , No. , (2022), pp.

Muhammad Muslim Rehman, Khubab Shaker, Yasir Nawab, "Effect of PEEK Particles on Physiomechanical Behavior of Carbon/Epoxy Composite", International Journal of Polymer Science, Vol. 2022, No. , (2022), pp.

Muhammad Umair, Muzzamal Hussain, Khubab Shaker, Yasir Nawab, "Impact Performance of Three-dimensional Woven Composites with Novel Binding Yarn Patterns", Journal of Natural Fibers, Vol. , No. , (2022), pp.

Muhammad Muslim Rehman, Khubab Shaker, Yasir Nawab, "Effect of poly ether ether ketone particles on v‐notched shear and drop weight impact behavior of carbon/epoxy composite", Polymer Composites, Vol. 43, No. 5, (2022), pp.5

Amna Siddique, Zohaib Iqbal, Yasir Nawab, Khubab Shaker, "A review of joining techniques for thermoplastic composite materials", Journal of Thermoplastic Composite Materials, Vol. , No. , (2022), pp.

Adeela Nasreen, Muhammad Kashif Bangash, Khubab Shaker, Yasir Nawab, "Effect of surface treatment on the performance of composite‐composite and composite‐metal adhesive joints", Polymer Composites, Vol. 43, No. 9, (2022), pp.9

Muhammad Umair, Ayesha Shahbaz, Ahsan Ahmad, Sohaib Arif, Khubab Shaker, Madeha Jabbar, Yasir Nawab, "Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites", Fibers and Polymers, Vol. 23, No. 10, (2022), pp.10

Azam Ali, Fiaz Hussain, Ambreen Kalsoom, Tauqeer Riaz, Muhammad Zaman Khan, Zakariya Zubair, Khubab Shaker, Jiri Militky, Muhammad Tayyab Noman, Munir Ashraf, "Multifunctional Electrically Conductive Copper Electroplated Fabrics Sensitizes by In-Situ Deposition of Copper and Silver Nanoparticles", Nanomaterials, Vol. 11, No. 11, (2021), pp.11

Khubab Shaker, Yasir Nawab, Abdelghani Saouab, "Thermal Expansion Coefficient: a macro-scale indicator of particle filtration in composites fabricated by RTM", Polymer Testing, Vol. , No. , (2021), pp.

Madeha Jabbar, Khubab Shaker, Yasir Nawab, Muhammad Umair, "Effect of the stuffer yarns on the mechanical performance of Novel 3D woven green composites", Composite Structures, Vol. , No. , (2021), pp.

A Nasreen, K Shaker, Y Nawab, "Effect of surface treatments on metal–composite adhesive bonding for high-performance structures: an overview", Composite Interfaces, Vol. 28, No. 12, (2021), pp.12

Adeela Nasreen, Khubab Shaker, Yasir Nawab, "Effect of surface treatments on metal-composite adhesive bonding for high-performance structures: An overview", Composite Interfaces, Vol. , No. , (2020), pp.

Muhammad Umair, Muzzamal Hussain, Zaheer Abbas, Khubab Shaker, Yasir Nawab, "Effect of Weave Architecture and Glass Microspheres Percentage on the Low Velocity Impact Response of Hemp/Green Epoxy Composites", Journal of Composite Materials, Vol. , No. , (2020), pp.

Zamurrad Arshad, Muhammad Ali Nasir, Yasir Baig, Muhammad Zeeshan, Rizwan Ahmed Malik, Khubab Shaker, Azhar Hussain, M. Latif, Maryam Sattar, Hussein Alrobei, "Drop Weight Impact and Tension-Tension Loading Fatigue Behaviour of Jute / Carbon Fibers Reinforced Epoxy-based Hybrid Composites", Polymer(Korea), Vol. , No. , (2020), pp.

Muhammad Zaheer Abbas, Salma Shahid, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Effect of Glass Microspheres and Fabric's weave Structure on the Mechanical Properties of Hemp/Green Epoxy Composites", Polymer composites, Vol. , No. , (2020), pp.

Khubab Shaker, Muhammad Umair, Syed Talha Ali Hamdani, Yasir Nawab, "Effect of fabric structure on the performance of 3D woven pressure sensor", Fibers and Polymers, Vol. , No. , (2020), pp.

Khubab Shaker, Raja Muhammad Waseem Ullah Khan, Madeha Jabbar, Muhammad Umair, Asra Tariq, Muhammad Kashif, Yasir Nawab, "Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber", Industrial Crops and Products, Vol. , No. , (2020), pp.

Muhammad Umair, Khubab Shaker, Muhammad Usman Javaid, Muzzamal Hussain, Muhammad Kashif, Yasir Nawab, "Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements", Mechanics of Advanced Materials and Structures, Vol. , No. , (2020), pp.

Khubab Shaker, Yasir Nawab, Abdelghani Saouab, "Effect of fillers on the mechanical performance and failure mode of glass/vinyl ester composites", Engineering Fracture Mechanics, Vol. , No. , (2019), pp.

Usman Ahmed, Asra Tariq, Yasir Nawab, Khubab Shaker, Zubair Khaliq, Muhammad Umair, "Mechanical Behaviour of Biaxial, Unidirectional and Standard Woven Fabric Reinforced Composites", Fibers and Polymers, Vol. , No. , (2019), pp.

Khubab Shaker, Yasir Nawab, Abdelghani Saouab, "Experimental and numerical investigation of reduction in shape distortion for angled composite parts", International Journal of Material Forming, Vol. , No. , (2019), pp.

Muhammad Imran Khan, Muhammad Umair, Khubab Shaker, Abdul Basit, Yasir Nawab, Muhammad Kashif, "Synthetic fibers waste reinforced concrete composite having improved mechanical properties", The Journal of The Textile Institute , Vol. , No. , (2019), pp.

Muhammad Muslim Rehman, Muhammad Zeeshan, Khubab Shaker, Yasir Nawab, "Effect of Micro-Crystalline Cellulose Filler on Mechanical Properties of Alkaline Treated Jute Fabric Reinforced Green Epoxy Composite", Cellulose, Vol. , No. , (2019), pp.

Aakash Ali, Muhammad Ali Nasir, Muhammad Yasir Khalid, Saad Nauman, Khubab Shaker, Shahab Khushnood, Khurram Altaf, Zeeshan Ali, Azhar Hussain, "Experimental and numerical characterisation of mechanical properties of carbon/Jute fabric reinforced epoxy hybrid composites", Journal of Mechanical Science and Technology, Vol. , No. , (2019), pp.

Muhammad Raza, Khubab Shaker, Yasir Nawab, Abdelghani Saouab, "Reduction in shape distortion of C-shaped composite parts", International Journal of Advanced Manufacturing Technology, Vol. , No. , (2019), pp.

Muhammad Umar Nazir, Khubab Shaker, Rizwan Hussain, Yasir Nawab, "Development of novel auxetic woven fabrics using helical auxetic yarn", Materials Research Express, Vol. , No. , (2019), pp.

Khubab Shaker, Yasir Nawab, Muhammad Ayub Asghar, Adeela Nasreen, Madeha Jabbar, "Tailoring the properties of leno woven fabrics by varying the structure", Mechanics of Advanced Materials and Structures, Vol. , No. , (2018), pp.

Muhammad Imran Khan, Jehan zeb Akram, Muhammad Umair, Syed Talha Ali Hamdani, Khubab Shaker, Yasir Nawab, Muhammad Zeeshan, "Development of novel 3D woven orthogonal structures with enhanced auxeticity", Journal of Industrial Textiles, Vol. , No. , (2018), pp.

Yasir Nawab; Muhammad Kashif; Muhammad Ayub Asghar; Ali Asghar; Muhammad Umair; Khubab Shaker; Muhammad Zeeshan, "Development & Characterization of Green Composites using Novel 3D Woven Preforms", Applied Composite Materials, Vol. 25, No. 4, (2018), pp.4

Adeela Nasreen, Muhammad Umair, Khubab Shaker, Syed Talha Ali Hamdani, Yasir Nawab, "Development and characterization of three-dimensional woven fabric for ultra violet protection", International Journal of Clothing Science and Technology, Vol. 30, No. 4, (2018), pp.4

Muhammad Kashif, Yasir Nawab, Syed Talha Ali Hamdani, Muhammad Ayub Asghar, Muhammad Umair, Khubab Shaker, "Optimization of 3D woven preform for improved mechanical performance", Journal of Industrial Textiles, Vol. , No. , (2018), pp.

Khubab Shaker, Muhammad Umair, Madeha Jabbar, Danish Mahmood Baitab, Yasir Nawab, Sheraz Ahmad, Ali Afzal, "Effect of Fabric Structural Design on the Thermal Properties of� Woven� Fabrics", Thermal Science, Vol. , No. , (2018), pp.

Aisha Rehman, Madeha Jabbar, Muhammad Umair, Yasir Nawab, Mariam Jabbar, Khubab Shaker, "A study on the interdependence of fabric pore size and its mechanical and comfort properties", Journal of Natural Fibers, Vol. , No. , (2018), pp.

Muhammad Umair, Khubab Shaker, Naseer Ahmad, Muzzamal Hussain, Madeha Jabbar, Yasir Nawab, " Simultaneous optimization of woven fabric properties using principal component analysis", Journal of Natural Fibers, Vol. , No. , (2017), pp.

Muhammad Umair, Khubab Shaker, Yasir Nawab, Abher Rasheed, Sheraz Ahmad, "A Study on the Twist Loss in Weft Yarn During Air Jet Weaving ", Journal of Engineered Fibers and Fabrics, Vol. , No. , (2017), pp.

Madeha Jabbar, Khubab Shaker, Muhammad Umair, Yasir Nawab, "Optimizing the performance of woven protective gloves using grey relational analysis", Journal of Textile Institute , Vol. , No. , (2017), pp.

Muhammad Haris Ameer, Khubab Shaker, Yasir Nawab, Mehmet Karahan, Sheraz Ahmad, Munir Ashraf, Muhammad Ali Nasir, "Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre reinforced composite materials", Journal of Textile Institute , Vol. , No. , (2017), pp.

Zaid Masood, Sheraz Ahmad, Muhammad Umair, Khubab Shaker, Yasir Nawab, Mehmet Karahan, "Mechanical behaviour of hybrid composites developed from textile waste", Fibres and Textiles in Eastern Europe, Vol. , No. , (2017), pp.

Sheraz Ahmad, Munir Ashraf, Azam Ali, Khubab Shaker, Muhammad Umair, Ali Afzal, Yasir Nawab, Abher rasheed, "Preparation of Conductive Polyethylene Terephthalate Yarns by Deposition of Silver & Copper Nanoparticles", Fibres and Textiles in Eastern Europe, Vol. , No. , (2017), pp.

Khubab Shaker, Yasir Nawab, Abdelghani Saouab, Munir Ashraf, Ahmad Nawaz Khan, "Effect of silica particle loading on shape distortion in glass/vinyl ester laminated composite plates", Journal of Textile Institute , Vol. , No. , (2017), pp.

Adeel Zulifqar, Khubab Shaker, Yasir Nawab, Danish Mahmood Baitab, Muhammad Umair, Muhammad Maqsood, "Development of low cost multi-layered woven seatbelts with optimum mechanical properties", Industria Textila, Vol. , No. , (2017), pp.

Khubab Shaker, Abdul Jabbar, Mehmet Karahan, Nevin Karahan, Yasir Nawab, "Study of Dynamic Compressive Behavior of Aramid and UHMWPE Composites Using Split Hopkinson Pressure Bar", Journal of Composite Materials, Vol. , No. , (2016), pp.

Muhammad Maqsood, Muhammad Imran Khan, Khubab Shaker, Muhammad Umair, Yasir Nawab, "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", Journal of Textile Institute , Vol. , No. , (2016), pp.

Menderes Koyuncu, Mehmet Karahan, Nevin Karahan, Khubab Shaker, Yasir Nawab, "Static and dynamic mechanical properties of cotton/epoxy green composites", Fibres and Textiles in Eastern Europe, Vol. , No. , (2016), pp.

Muhammad Maqsood, Yasir Nawab, Jawairia Umar, Muhammad Umair, Khubab Shaker, "Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garments", Journal of Textile Institute , Vol. , No. , (2016), pp.

Muhammad Umar, Khubab Shaker, Yasir Nawab, Sheraz Ahmed, Muhammad Umair, Muhammad Maqsood, "Investigating the mechanical behavior of composites made from textile industry waste", Journal of Textile Institute , Vol. , No. , (2016), pp.

Azam Ali, Khubab Shaker, Yasir Nawab, Madeha Jabbar, Tanveer Hussain, Jiri Militky, Vijay Baheti , "Hydrophobic treatment of natural fibers and their composites - A review", Journal of Industrial Textiles, Vol. , No. , (2016), pp.

Muhammad Umar Nazir, Khubab Shaker, Yasir Nawab, Muhammad Zohaib Fazal, Muhammad Imran Khan, Muhammad Umair, "Investigating the effect of material and weave design on comfort properties of bilayer woven fabrics ", Journal of Textile Institute , Vol. , No. , (2016), pp.

Waqas Ashraf, Yasir Nawab Muhammad Umair, Khubab Shaker, Mehmet Karahan, "Investigation of Mechanical Behavior of Woven/Knitted Hybrid Composites", Journal of Textile Institute , Vol. , No. , (2016), pp.

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javed, Khubab Shaker, Muhammad Umair, "Development of Seersucker Fabrics using Single Warp Beam and Modeling of their Stretch-Recovery Behavior", Journal of The Textile Institute, Vol. , No. , (2015), pp.

Azam ali, Khubab Shaker, Yasir Nawab, Abdul Basit, Munir Ashraf, Salma Shahid, Muhammad Umair, "Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material", Journal of Reinforced Plastics and Composites, Vol. , No. , (2015), pp.

Muhammad Umair, Yasir Nawab, Mumtaz Hasan Malik, Khubab Shaker, Azam Ali, "Development and characterization of 3D woven shaped preforms and their associated composites ", Journal of Reinforced Plastics and Composites, Vol. , No. , (2015), pp.

Muhammad Maqsood, Yasir Nawab, Syed Talha Ali Hamdani, Khubab Shaker, Muhammad Umair, Waqas Ashraf, "Effect of weave structures and yarn materials on the barrier effectiveness of woven surgical gowns", Journal of Textile Institute , Vol. , No. , (2015), pp.

Khubab Shaker, Munir Ashraf, Madeha Jabbar, Salma shahid, Yasir Nawab, Jasim Zia, Abdur Rehman, "Bioactive woven flax based composites: development and characterization", Journal of Industrial Textiles, Vol. , No. , (2015), pp.

Muhammad Umair, Tanveer Hussain, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Madeha Jabbar, "Effect of woven fabric structure on the air permeability and moisture management properties", Journal of Textile Institute , Vol. , No. , (2015), pp.

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Danish Mahmood Baitab, Syed Talha Ali Hamdani, Munir Ashraf, Salma Shahid, "Modelling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics", Autex Research Journal, Vol. , No. , (2015), pp.

Khubab Shaker, Muhammad Umair, Muhammad Maqsood, Yasir Nawab, Sheraz Ahmed, Abher Rasheed, Munir Ashraf, Abdul Basit, "A statistical approach for obtaining the controlled woven fabric width", Autex Research Journal, Vol. , No. , (2015), pp.

Khubab Shaker, Yasir Nawab, Muhammad Usman Javaid, Muhammad Umair, Muhammad Maqsood, "Development of 3d woven fabric based pressure switch", Autex Research Journal, Vol. , No. , (2015), pp.

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of Warp and Weft Yarn Crimp in Cotton Woven Fabrics", Journal of The Textile Institute, Vol. , No. , (2015), pp.

Khubab Shaker, "Composite materials, a tailorable solution for Pakistan’s future manufacturing economy", 6th International Conference on Value Addition & Innovation in Textiles (COVITEX), Venue: Faisalabad-Pakistan, (2021)

Khubab Shaker, "Role of Composite Materials in the future manufacturing economy of Pakistan", 2nd International Conference on Technical Textiles, Venue: Faisalabad-Pakistan, (2020)

Khubab Shaker, Yasir Nawab, Abdelghani Saouab, "Numerical analysis of fabrication and shape distortion in particle loaded composites", Design and Simulation in technical textiles, T & G TexTech Webinar series, Venue: Monastir-Tunisia, (2020)

Khubab Shaker, Yasir Nawab, Muhammad Umair, "Status of Composite Materials Industry in Pakistan: Challenges and opportunities", Conference on Emerging Materials and Processes (CEMP-2019), Venue: Islamabad-Pakistan, (2019)

Khubab Shaker, Yasir Nawab, Madeha Jabbar, Muhammad Imran Khan, "3D woven Composite Materials for ballistic applications", 16TH INTERNATIONAL SYMPOSIUM ON ADVANCED MATERIALS (ISAM-2019), Venue: Islamabad-Pakistan, (2019)

Muhammad Zeeshan, Yasir Nawab, Khubab Shaker, Muhammad Umair, Muhammad Kashif, "Mechanical Characterization of Economical, Waste Based Hybrid Composites for Automotive Applications", 1st International Conference on Advances in Engineering & Technology (ICAET 2018), Venue: Quetta – Pakistan, (2018)

Khubab Shaker, Yasir Nawab, Abdelghani Saouab, "Experimental and numerical investigation of warpage in particle loaded thin composite plates", 4th International Conference on Mechanics of Composites, Venue: Madrid-Spain, (2018)

Khubab Shaker, "Textile Composites: Materials of the Future", 1st National Conference on Technical Textiles, Venue: Faisalabad, (2016)

Khubab Shaker, Sadaf Mehmood, Yasir Nawab and Madeha Jabbar, "Fabricating thermoplastic composites by comingled weaving", 13th International Bhurban Conference on Advances in Science & Technology (IBCAST 2016), Venue: Islamabad, (2016)

Muhammad Maqsood, Yasir Nawab, Haritham Khan, Khubab Shaker, Muhammad Umair , "Effect of weave structure and fabric thread density on barrier effectiveness of woven surgical gowns", Medtex, Venue: Lodz, Poland, (2015)

Khubab Shaker, Munir Ashraf, Yasir Nawab, Madeha Jabbar, Muhammad Umair, Azam Ali, "Development Of Natural Fiber Reinforced Functional Composites", 3rd International Conference on Value Addition and Innovation in Textiles (COVITEX 2015), Venue: Faisalabad, (2015)

Madeha Jabbar, Yasir Nawab, Munir Ashraf, Khubab Shaker, "Numerical analysis of self-healing composite materials", 12th International Bhurban Conference on Advances in Science & Technology (IBCAST 2015), Venue: Islamabad, (2015)

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, "3D shaped woven structures for structural composite applications", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Khubab Shaker, Yaisr Nawab, Munir Ashraf, "Development of natural fiber composites with antibacterial activity", 3rd ASEAN-Pakistan Conference on Material Science (APCoMS-3), Venue: Islamabad-Pakistan, (2014)

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Muhammad Maqsood, Tanveer Hssain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

Khubab Shaker, Yasir Nawab, Muhammad Umair, Adeel Zulfiqar, Muhammad Maqsood, Danish Mehmood Baitab, "Finite element modelling of resin flow in woven reinforcement for composites using resin transfer molding", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Muhammad Maqsood, Yasir Nawab, Khubab Shaker, Muhammad Umair, Danish Mehmood, Adeel Zulfiqar, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

Development Of Durable, Light Weight And Smart Luggage Bags From Composite Materials

Awarding Body: HEC Pakistan
Awarding Year: 2019
Amount: 14

Best Teacher Award

Fabric Manufacturing Department  (2013)

Silver Medal

National Textile University  (2010)