Khubab Shaker, Muhammad Adnan, Yasir Nawab, Muhammad Umair, Madeha Jabbar, Amna Siddique and Ahsan Ahmad, , "Mechanical Performance of Glass/Epoxy Composites Loaded with Silane-Treated Aluminum Hydroxide Fillers", Polymers, Vol. 15, No. 18, (2023), pp.18

Zohaib Iqbal, Amna Siddique, Yasir Nawab and Khubab Shaker,, " A comparative static and dynamic behavior of thermoplastic composite joints produced using different joining techniques", Polymer composites, Vol. , No. , (2023), pp.

Xing Zhong Gao, Wen, Danyang, Amna Siddique, Liu Tao, Fan Wei, Chen Hon, Cao Miao,, "Flexural performance of three-dimensional braided open hole composite with different hole diameter and preform size", Journal of Industrial Textile, Vol. , No. , (2023), pp.

Xing Zhong Gao, Wen, Danyang, Amna Siddique, Liu Tao, Fan Wei, Chen Hon, Cao Miao, "Damage evolution and failure mechanism of three-dimensional braided composite subjected to varied high strain-rate loadings", Textile Research Journal, Vol. , No. , (2022), pp.

Xing Zhong Gao, Muhammad Umair, Yasir Nawab, Zeeshan Latif, Sheraz Ahmad, Amna Siddique and Hongyue Yang, "Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review", Polymers, Vol. , No. , (2022), pp.

Amna Siddique, Zohaib Iqbal, Yasir Nawab and Khubab Shaker, "A review of joining techniques for thermoplastic composite materials", Journal of Thermoplastic Composite Materials, Vol. , No. , (2022), pp.

Faiza Nazir, Amna Siddique, Ahsan Nazir, Sonia Javed,Tanveer Hussain, Sharjeel Abid, "Eco-friendly dyeing of cotton using waste-derived natural dyes and mordants", Coloration Technology, Vol. , No. , (2022), pp.

Sheraz Ahmad, Munir Ashraf, Sharjeel Abid, Madeha Jabbar, Faizan Shafiq, and Amna Siddique, "Recent Developments in Laser Fading of Denim: A Critical Review", Journal of natural fibers, Vol. , No. , (2022), pp.

Azmat Hussain, Muhammad Sajid, Danish Iqbal, Muhammad Ilyas Sarwar, Assad Farooq, Amna Siddique, Muhammad Qamar Khan , and Ick-Soo Kim, "Impact of Novel Varietal and Regional Differences on Cotton Fiber Quality Characteristics", Materials, Vol. , No. , (2022), pp.

Muhammad Usman Ghani, Amna Siddique , Kahsay Gebresilassie Abraha, Lan Yao, Wei Li, Muhammad Qamar Khan and Ick-Soo Kim, "Performance Evaluation of Jute/Glass-Fiber-Reinforced Polybutylene Succinate (PBS) Hybrid Composites with Different Layering Configuration", Materials, Vol. , No. , (2022), pp.

Amna Siddique, Sharjeel Abid, Faizan Shafiq, Hailou Wang, Baohui Shi, Sidra Saleemi, Baozhong Sun, " Mode I fracture toughness of Carbon/epoxy composites: A review", Journal of Industrial Textile, Vol. , No. , (2021), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, "Finite element modeling on fracture toughness of 3-D angle-interlock woven carbon/epoxy composites at microstructure level", Mechanics of advanced materials and structures, Vol. , No. , (2021), pp.

Amna Siddique, Tufail hussan, Sharjeel Abid, munir Ashraf, Azmat Hussain, Faizan Shafiq, "The Effect of Softeners Applications on Moisture Management Properties of Polyester/Cotton Blended Sandwich Weft-Knitted Fabric Structure", Coatings, Vol. , No. , (2021), pp.

Shafiq, Faizan , Amna Siddique, Pervez, Md Nahid , "Extraction of natural dye from aerial parts of argy wormwood based on optimized taguchi approach and functional finishing of cotton fabric", Materials, Vol. , No. , (2021), pp.

Muhammad Aslam, Zulifqar Ali Raza, Amna Siddique, "Fabrication and chemo-physical characterization of CuO/chitosan nanocomposite-mediated tricomponent PVA films", Polymer Bulletin, Vol. , No. , (2020), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, , "Structural influences of 2-D and 3-D woven carbon/epoxy composites on Mode I fracture toughness behaviors with rate effects on damage", Journal of Industrial Textiles, Vol. 50, No. 1, (2020), pp.1

Xingzhong Gao, Amna Siddique, Bohong Gu, Baozhong Sun, "Influence of braiding angle on multiple impact damages along longitudinal direction", Applied Composite Materials , Vol. 26, No. , (2019), pp.

Baohui Shi, Shengkai Liu, Amna Siddique, Yongcan Du, Baozhong Sun, Bohong Gu, "Impact fracture behaviors of three-dimensional braided composite U-notch beam subjected to three-point bending", International Journal of Damage Mechanics, Vol. , No. , (2019), pp.

Xingzhong Gao, Amna Siddique, Bohong Gu, Baozhong Sun, "Effect of braiding angle on dynamic mechanical properties of 3-Dbraided rectangular composites under multiple impact compression", Journal of Composite Materials, Vol. 53, No. 13, (2019), pp.13

Baohui Shi, Shengkai Liu, Amna Siddique, Junjie Zhang, Bohong Gu, Baozhong Sun, "Comparisons on impact fracture behavior between three-dimensional four directional and five directional braided composite materials", International Journal of Damage Mechanics, Vol. 7, No. , (2019), pp.

Chunlei Ren, Amna Siddique, Baozhong Sun, Bohong Gu, "Differences of transverse impact damages in 3D angle-interlock woven composites between warp and weft directions", International Journal of Damage Mechanics, Vol. 28, No. 8, (2019), pp.8

Anvarjon Nishonov, Kai Dong, Amna Siddique, Juramirza Kyumov, Baozhong Sun, Bohong Gu, "Temperature and strain rate dependent Impact tensile behaviors of 3D Carbon fiber/Epoxy Angle Interlock woven composites", Scientific and Technical Journal of NamIET, Vol. , No. , (2019), pp.

Amna Siddique, Baozhong Sun, Bohong Gu, "Effect of pre crack length on Mode I fracture toughness of 3-D angle-interlock woven composites from finite element analyses", Journal of the Textile Institute, Vol. 110, No. 10, (2019), pp.10

Amna Siddique, Tanveer Hussain, Waseem Ibrahim, Zulfiqar Ali Raza, Sharjeel Abid, "Optimization of discharge printing of indigo denim using potassium permanganate via response surface regression", Pigment and Resin Technology, Vol. , No. , (2018), pp.

Chunlei Ren, Tao Liu, Amna Siddique, Baozhong Sun, Bohong Gu, "High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts", International Journal of Mechanical Sciences, Vol. , No. , (2018), pp.

Shengkai Liu, Baohui Shi, Amna Siddique, Yongcan Du, Baozhong Sun, Bohong Gu, "Numerical analyses on thermal stress distribution induced from impact compression in 3D carbon fiber/epoxy braided composite materials", Journal of Thermal Stresses, Vol. , No. , (2018), pp.

Mingling Wang, Miao Cao, Hailou Wang, Amna Siddique, Bohong Gu, Baozhong Sun, "Drop-weight impact behaviors of 3-D angle interlock woven composites after thermal oxidative aging", Composite Structures, Vol. , No. , (2017), pp.

Amna Siddique, Tanveer Hussain, Waseem Ibrahim, Zulfiqar Ali Raza, Sharjeel Abid, Ahsan Nazir, "Response Surface Optimization in Discharge Printing of Denim Using Potassium Permanganate as Oxidative Agent", Clothing and Textiles Research Journal, Vol. , No. , (2017), pp.

Zulfiqar Ali Raza, Amna Siddque, Muhammad Mohsin, "Multi-Performance Enhancement of Knitted Wool Fabric with Citric Acid: An Eco-Compatible Cross-Linker", Journal of Natural Fibers , Vol. , No. , (2017), pp.

Hailou Wang, Miao Cao, Amna Siddique, Baozhong Sun, Bohong Gu, "Numerical analysis of thermal expansion behaviors and interfacial thermal stress of 3D braided composite materials", Computational Materials Science, Vol. , No. , (2017), pp.

Sharjeel Abid, Tanveer Hussain, Ahsan Nazir, Zulfiqar Ali Raza, Amna Siddique, Abdul Azeem, Shagufta Riaz, "Simultaneous Fixation of Wrinkle-Free Finish and Reactive Dye on Cotton Using Response Surface Methodology", Clothing and Textiles Research Journal, Vol. , No. , (2017), pp.