•  Address: , - ,
  •  Phone:  Ext:
  •  Fax:
  •  Email:
  • No. of Journal Publications: 131
  • No. of Conference Papers: 33



  1. Post Doctorate (Composite materials)
    ONERA, France  (2012-13)
  2. Ph.D (Mechanical Engg.)
    University of Nantes, France  (2009-12)
  3. Masters (Materials & Textile processing)
    ENSAIT (Roubaix)/ ENSAM (Paris, France  (2008-09)
  4. B.Sc Textile Engg
    NTU, Faisalabad., Pakistan  (2000-04)

  1. International workshop on “Shaping the Future with Sustainable Materials -Opportunities after the Pandemic"
    Fibrenamics (3rd June 2020)

  2. Training: Shedding mechanism by Staubli®,
    France at National Textile University Faisalabad (July 2007)

  3. Training course on “Processes of fabrication of composites and associated modeling”
    Nantes, France. (01-03rd March 2010)

  4. Summer school “Erasmus Mundus Computational Mechanics Week” (
    Nantes, France, (21-23rd June 2011)

  5. How to improve Industry-Academia Linkage,
    Pakistan Institute of Entrepreneurship (April 16, 2016)

  6. Training: Technical Textiles organized
    Shinhan University South Korea and KOICA, (18-31st July 2016)

  7. Workshop: Two days International Training workshop on Outcome Based Education,
    PEC & NTU, ( September 2016)

  8. Training: Role of Faculty as Nation Builders,
    IBA & NTU ( September 2016)

  9. Training: Material Characterisation Techniques,
    NTU ( 3-4 August 2017)

  10. Training: AutoCAD for Engineering,
    NTU ( 10-11 August 2017)

  11. Training on “Online Tools for Project Management”
    NTU and PEC (January 03, 2018)

  12. Training: Outcome Based Education and Complex Engineering Problems/Activities,,
    PEC & PHEC (16-17th October 2019 )

  13. One day Workshop on Textile Industrial Diagnosis,
    Board of Investment, ( 22nd January 2020)

  14. 1. Innovation Management
    Erasmus University Rotterdam ( May 2022)

  15. International Workshop “From Waste to Advanced Materials and Products”,
    Fibrenamics (April 21, 2021)

  16. Training on “Toyota 5S methodology”
    Toyota and UNAP (July 11, 2021)

  17. Master Trainer Programme on Chemical Management in line with ZDHC Requirements,
    Fabric Asia, GIZ ( June - August 2021)

  18. Risk Assessment and Management,
    Pakistan Engineering Council, ( 28th May 2022 )

  19. Coursera Administrator Training,
    On Coursera ( June 2020)

  20. Researcher Management and Leadership Training
    University of Colorado (on Coursera) (June 2020)

  21. 7. Introduction to Project Management
    On Coursera (June 2020)

  22. Initiating and Planning Projects
    University of California, Irvine (on Coursera) (June 2020)

  23. Budgeting and Scheduling Projects
    University of California, Irvine (on Coursera) (June 2020)

  24. Managing Project Risks and Changes
    University of California, Irvine (on Coursera), (June 2020)

  25. Performance Assessment in the Virtual Classroom,
    University of California, Irvine (June 2020)

  26. The 3D Printing Revolution
    University of Illinois at Urbana-Champaign (June 2020)


  1. Associate Professor
    National Textile University (2018 - 2023)

  2. Director (Dean) School of Engineering & Technology
    National Textile University (2018 - to date)

  3. Professor
    National Textile University  (2023 - date )

  4. Assistant Professor
    National Textile University (2013 - 2018)

    Teaching, Research, Management


  5. Director Graduate Studies & Research
    National Textile University (2016 - 2018)

  6. Chairman Department of Weaving
    National Textile University (2013 - 2018)

  7. Chairman Department of Polymer Engineering
    National Textile University (2016 -2019)

  8. Advisor Students
    National Textile University (2014 - 2016 )

  9. Chairman Department of Knitting
    National Textile University (2014 - 2016)

  10. Vacataire (Lecturer)
    IUT Saint Nazaire, University of Nantes - France (2011-12)

    Teaching


  11. A. Manager
    Crescent Textile Mills (2005-2008)

    Quality Control, Product Developement, Production & Planning


  12. Researcher
    University of Le Havre - France & The French Aerospace Lab (ONERA), Paris - France  (2012-13)

    Research



2022

1

Umair M., Shaker K., Javaid M.U., Hussain M., Kashif M., Nawab Y., "Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements", Mechanics of Advanced Materials and Structures, Vol. 29, No. , (2022), pp.

2

Uz Zaman S., Shahid S., Shaker K., Nawab Y., Ahmad , "Development and characterization of chemical and fire resistant jute/unsaturated polyester composites", Journal of the Textile Institute, Vol. 113, No. , (2022), pp.

3

Ahmad H.S., Hussain T., Nawab Y., Salamat S., "Effect of dielectric and magnetic nanofillers on electromagnetic interference shielding effectiveness of carbon/epoxy composites", Journal of Composite Materials, Vol. 56, No. , (2022), pp.

4

Ilyas R.A., Zuhri M.Y.M., Aisyah H.A., Asyraf M.R.M., Hassan S.A., Zainudin E.S., Sapuan S.M., Sharma S., Bangar S.P., Jumaidin R., Nawab Y., …, "Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications", Polymers, Vol. 14, No. , (2022), pp.

5

Umair M., Javaid M.U., Nawab Y., Jabbar M., Riaz S., Abid H.A., Shaker K., "Thermal properties of woven fabric as a function of its structural parameters: experimentation and modeling", Research Journal of Textile and Apparel, Vol. , No. , (2022), pp.

6

Nazir M.U., Javaid M.U., Shaker K., Nawab Y., Hussain T., Umair M., "Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics", Research Journal of Textile and Apparel, Vol. , No. , (2022), pp.

7

Arif S., Nawab Y., Shaker K., Umair M., "Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications", Journal of Industrial Textiles, Vol. , No. , (2022), pp.

8

Rehman M.M., Shaker K., Nawab Y., "Effect of PEEK Particles on Physiomechanical Behavior of Carbon/Epoxy Composite", International Journal of Polymer Science, Vol. 2022, No. , (2022), pp.

9

Ahmad H.S., Hussain T., Nawab Y., Salamat S., "Effect of various dielectric and magnetic nanofillers on microwave absorption properties of carbon fiber reinforced composites structures", Ceramics International, Vol. , No. , (2022), pp.

10

Rehman M.M., Shaker K., Nawab Y., "Effect of poly ether ether ketone particles on v-notched shear and drop weight impact behavior of carbon/epoxy composite", Polymer Composites, Vol. , No. , (2022), pp.

11

Hussain M., Arif S., Nawab Y., Shaker K., Umair M., "Development of functional (flame-retardant and anti-bacterial) and hybrid (carbon-glass/epoxy) composites with improved low velocity impact response", Polymer Composites, Vol. 43, No. , (2022), pp.

12

Hussain M., Imad A., Nawab Y., Saouab A., Herbelot C., Kanit T., "Effect of matrix and hybrid reinforcement on fibre metal laminates under low–velocity impact loading", Composite Structures, Vol. 288, No. , (2022), pp.

2021

13

Ahmed H.I., Umair M., Nawab Y., Hamdani S.T.A., "Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns", Journal of the Textile Institute, Vol. 112, No. , (2021), pp.

14

Zubair K., Shakir M.F., Afzal A., Rehan Z.A., Nawab Y., "Effect of Barium Hexaferrites and Thermally Reduced Graphene Oxide on EMI Shielding Properties in Polymer Composites", Journal of Superconductivity and Novel Magnetism, Vol. 34, No. , (2021), pp.

15

Nasreen A., Shaker K., Nawab Y., "Effect of surface treatments on metal–composite adhesive bonding for high-performance structures: an overview", Composite Interfaces, Vol. 28, No. , (2021), pp.

16

Zeeshan M., Ali M., Riaz R., Anjum A.S., Nawab Y., Qadir M.B., Ahmad S., "Optimizing the Auxetic Geometry Parameters in Few Yarns Based Auxetic Woven Fabrics for Enhanced Mechanical Properties Using Grey Relational Analysis", Journal of Natural Fibers, Vol. , No. , (2021), pp.

17

Fazal M.Z., Khan S., Abbas M.A., Nawab Y., Younis S., "Machine learning approach for prediction of crimp in cotton woven fabrics", Tehnicki Vjesnik, Vol. 28, No. , (2021), pp.

18

Hameed M.N., Nawab Y., Zubair M., Umair M., Ahmad Z., Shaker K., "Double face fabrics: a tailorable solution for puncture resistant applications", Journal of the Textile Institute, Vol. , No. , (2021), pp.

19

Khan M.I., Umair M., Hussain R., Karahan M., Nawab Y., "Investigation of impact properties of para-aramid composites made with a thermoplastic-thermoset blend", Journal of Thermoplastic Composite Materials, Vol. , No. , (2021), pp.

20

Awais H., Ahmad F., Azam F., Shahid S., Nawab Y., Ahmad S., "An economical and environmentally benign approach to extract banana fibres from agricultural waste for fibre reinforced composites", Journal of the Textile Institute, Vol. , No. , (2021), pp.

21

Umair M., Hamdani S.T.A., Hussain M., Nawab Y., "Mechanical performance of 3D woven jute/green epoxy composites with novel weaving patterns", Journal of Industrial Textiles, Vol. , No. , (2021), pp.

22

Uddin Z., Ahmad F., Ullan T., Nawab Y., Ahmad S., Azam F., Rasheed A., Zafar M.S., "Recent trends in water purification using electrospun nanofibrous membranes", International Journal of Environmental Science and Technology, Vol. , No. , (2021), pp.

23

Asghar M.A., Imad A., Nawab Y., Hussain M., Saouab A., "Effect of yarn singeing and commingling on the mechanical properties of jute/polypropylene composites", Polymer Composites, Vol. 42, No. , (2021), pp.

24

Siddique A., Abid S., Shafiq F., Nawab Y., Wang H., Shi B., Saleemi S., Sun B., "Mode I fracture toughness of fiber-reinforced polymer composites: A review", Journal of Industrial Textiles, Vol. 50, No. , (2021), pp.

25

Shaker K., Umair M., Hamdani S.T.A., Nawab Y., "Effect of Fabric Structure on the Performance of 3D Woven Pressure Sensor", Fibers and Polymers, Vol. 22, No. , (2021), pp.

26

Awais H., Nawab Y., Amjad A., Anjang A., Md Akil H., Zainol Abidin M.S., "Environmental benign natural fibre reinforced thermoplastic composites: A review", Composites Part C: Open Access, Vol. 4, No. , (2021), pp.

27

Shaker K., Nawab Y., Shahid S., Saouab A., "Thermal expansion coefficient: A macro-scale indicator of particle filtration in composites fabricated by resin infusion", Polymer Testing, Vol. 96, No. , (2021), pp.

28

Zahid M., Siddique S., Anum R., Shakir M.F., Nawab Y., Rehan Z.A, "M-Type Barium Hexaferrite-Based Nanocomposites for EMI Shielding Application: a Review", Journal of Superconductivity and Novel Magnetism, Vol. 34, No. , (2021), pp.

29

Hussain M., Imad A., Saouab A., Kanit T., Nawab Y., Herbelot C., Kashif M., "Properties and characterization of novel 3D jute reinforced natural fibre aluminium laminates", Journal of Composite Materials, Vol. 55, No. , (2021), pp.

30

Umair M., Hamdani S.T.A., Nawab Y., Asghar M.A., Hussain T., "Compression and recovery behavior of three-dimensional woven spacer composites", Journal of Industrial Textiles, Vol. 51, No. , (2021), pp.

31

Umair M., Hussain M., Abbas Z., Shaker K., Nawab Y., "Effect of weave architecture and glass microspheres percentage on the low velocity impact response of hemp/green epoxy composites", Journal of Composite Materials, Vol. 55, No. , (2021), pp.

32

Jabbar A., Ahmad A., Adnan M., Nawab Y., Javed Z., Irfan M., "Enhanced interlaminar shear and impact performance of woven carbon/epoxy composites interleaved with needle punched high performance polyethylene fiber nonwoven", Journal of Applied Polymer Science, Vol. 138, No. , (2021), pp.

33

Jabbar M., Shaker K., Nawab Y., Umair M., "Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites", Composite Structures, Vol. 269, No. , (2021), pp.

34

Zeeshan M., Ali M., Anjum A.S., Nawab Y, "Optimization of mechanical/thermal properties of glass/flax/waste cotton hybrid composite", Journal of Industrial Textiles, Vol. 51, No. , (2021), pp.

35

Khan M.I., Umair M., Hussain R., Nawab Y., "Effect of Micro-fillers on the Performance of Thermoplastic Para Aramid Composites for Impact Applications", Fibers and Polymers, Vol. 22, No. , (2021), pp.

36

Bajwa G.A., Umair M., Nawab Y., Rizwan Z., "Morphometry of leaf and shoot variables to assess aboveground biomass structure and carbon sequestration by different varieties of white mulberry (Morus alba L.)", Journal of Forestry Research, Vol. 32, No. , (2021), pp.

37

Ahmad F., Mushtaq B., Butt F.A., Zafar M.S., Ahmad S., Afzal A., Nawab Y., Rasheed A., Ulker Z., "Synthesis and characterization of nonwoven cotton-reinforced cellulose hydrogel for wound dressings", Polymers, Vol. 13, No. , (2021), pp.

2020

38

Hussain M, Imad A, Saouab A, Kanit T, Nawab Y, Herbelot C, et al., "Properties and characterization of novel 3D Jute Reinforced natural fibre Aluminium Laminates", Journal of composite materials , Vol. , No. , (2020), pp.

39

Asghar, M.A, Imad, A., Nawab, Y, Hussain, M, Saouab, A., "Effect of yarn singeing and commingling on the mechanical properties of Jute/PP Composites", Polymer Composites, Vol. , No. , (2020), pp.

40

Ahmed, H.I., Umair, M., Nawab, Y., Hamdani, S.T.A., "Development of 3D Auxetic Structures using Para-Aramid and Ultra-High Molecular Weight Polyethylene Yarns", Journal of The Textile Institute, Vol. , No. , (2020), pp.

41

Khubab Shaker, Muhammad Umair, Salma Shahid, Madeha Jabbar, Raja Muhammad Waseem Ullah Khan, Muhammad Zeeshan & Yasir Nawab, "Cellulosic fillers extracted from Argyreia speciose waste: a potential reinforcement for composites to enhance properties", Journal of Natural Fibers, Vol. , No. , (2020), pp.

42

Iftekhar, H., Ullah Khan, R.M.W., Nawab, Y., Hamdani, S.T.A., Panchal, , "Numerical Analysis of Binding Yarn Float Length for 3D Auxetic Structures", Physica Status Solidi (B) Basic Research, Vol. 257, No. , (2020), pp.

43

Gulzar, N., Zubair, K., Shakir, M.F., (...), Nawab, Y., Rehan, Z.A., "Effect on the EMI Shielding Properties of Cobalt Ferrites and Coal-Fly-Ash Based Polymer Nanocomposites", Journal of Superconductivity and Novel Magnetism, Vol. 33, No. , (2020), pp.

44

Abbas, Z., Shahid, S., Nawab, Y., Shaker, K., Umair, M., "Effect of glass microspheres and fabric weave structure on mechanical performance of hemp/green epoxy composites", Polymer Composites, Vol. 41, No. , (2020), pp.

45

Azam, Z., Jamshaid, H., Nawab, Y., Mishra, R., Muller, M., Choteborsky, R., Kolar, V., Tichy, M., Petru, M., "Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs", Journal of industrial textiles, Vol. , No. , (2020), pp.

46

Ullah, T., Ahmad, S., Nawab, Y., "Development of Helical Auxetic Yarn having Negative Poison’s Ratio using Combinations of different materials and Wrapping Angle", Journal of industrial textiles, Vol. , No. , (2020), pp.

47

Shaker K, Khan RMWU, Jabbar M, Umair M, Tariq A, Kashif M, Nawab Y, "Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber", Industrial Crops and Products, Vol. 152, No. , (2020), pp.

48

Awais H., Nawab Y., Amjad A., Anjang A., Md Akil H., Zainol Abidin M.S., "Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites", Composites Part B: Engineering, Vol. , No. , (2020), pp.

49

Umair M, Shaker K, Javaid MU, Hussain M, Kashif M, Nawab Y, "Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements", Mechanics of Advanced Materials and Structures, Vol. , No. , (2020), pp.

50

Awais H., Nawab Y., Amjad A., Anjang A., Md Akil H., Zainol Abidin M.S., "Mechanical properties of continuous natural fibres (jute, hemp, flax) reinforced polypropylene composites modified with hollow glass microspheres", Fibers and Polymers, Vol. , No. , (2020), pp.

51

Khan MI, Umair M, Shaker K, Basit A, Nawab Y, Kashif M, "Impact of waste fibers on the mechanical performance of concrete composites", Journal of the Textile Institute, Vol. , No. , (2020), pp.

52

Aaboud, B., Bizet, L., Saouab, A., & Nawab, Y., "Effect of the Spatial Variation of Permeability on Air Bubble Creation and Compression", Journal of Reinforced Plastics and Composites, Vol. 39, No. , (2020), pp.

53

Shaker K., Waseem Ullah Khan R.M., Jabbar M., Umair M., Tariq A., Kashif M., Nawab Y., "Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber", Industrial Crops and Products, Vol. 152, No. , (2020), pp.

2019

54

M. Kashif, T. Hamdani, Y. Nawab*, A. Asghar, M. Umair, K. Shaker, "Optimization of 3D woven preform for improved mechanical performance", Journal of Industrial Textiles, Vol. 48, No. , (2019), pp.

55

Siddique A., Abid S., Shafiq F., Nawab Y., Wang H., Shi B., Saleemi S., Sun B., "Mode I fracture toughness of fiber-reinforced polymer composites: A review", Journal of Industrial Textiles, Vol. , No. , (2019), pp.

56

Zahid S., Nasir M.A., Nauman S., Karahan M., Nawab Y., Ali H.M., Khalid Y., Nabeel M., Ullah M., "Experimental analysis of ILSS of glass fibre reinforced thermoplastic and thermoset textile composites enhanced with multiwalled carbon nanotubes", Journal of Mechanical Science and Technology, Vol. 33, No. , (2019), pp.

57

Iftekhar H., Ullah Khan R.M.W., Asghar M.A., Qadeer A., Umair M., Nawab Y., Hamdani S.T.A., "Study of comfort performance of novel car seat design for long drive", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. , No. , (2019), pp.

58

Ameer M.H., Nawab Y., Ali Z., Imad A., Ahmad S., "Development and characterization of jute/polypropylene composite by using comingled nonwoven structures", Journal of the Textile Institute, Vol. , No. , (2019), pp.

59

Raza M., Shaker K., Nawab Y., Saouab A., "Reduction in process-induced shape distortion of C-shaped composite parts using micro silica particles", International Journal of Advanced Manufacturing Technology, Vol. 103, No. , (2019), pp.

60

Ali M., Kausar F., Shahid S., Zeeshan M., Nawab Y., Riaz R., Memon A.A., Mengal N., Anjum A.S., "Novel derivatives of 3D woven T-shaped composites with improved performance", Journal of the Textile Institute, Vol. 110, No. , (2019), pp.

61

Jabbar M., Karahan M., Nawab Y., Ashraf M., Hussain T., "Effect of silica nanoparticles on mechanical properties of Kevlar/epoxy hybrid composites", Journal of the Textile Institute, Vol. 110, No. , (2019), pp.

62

Umair M., Hamdani S.T.A., Nawab Y., Asghar M.A., Hussain T., Saouab A., "Effect of Pile Height on the Mechanical Properties of 3D Woven Spacer Composites", Fibers and Polymers, Vol. 20, No. , (2019), pp.

63

Karahan M., Karahan N., Nasir M.A., Nawab Y., "Effect of structural hybridization on ballistic performance of aramid fabrics", Journal of Thermoplastic Composite Materials, Vol. 32, No. , (2019), pp.

64

Wassem M., Baig S.A., Abrar M., Hashim M., Zia-Ur-Rehman M., Awan U., Amjad F., Nawab Y., "Impact of Capacity Building and Managerial Support on Employees’ Performance: The Moderating Role of Employees’ Retention", SAGE Open, Vol. 9, No. 3, (2019), pp.3

65

Kashif M., Hamdani S.T.A., Zubair M., Nawab Y., "Effect of interlocking pattern on short beam strength of 3D woven composites", Journal of Composite Materials, Vol. 53, No. , (2019), pp.

66

Shaker, K., Nawab, Y., Saouab, A., "Influence of silica fillers on failure modes of glass/vinyl ester composites under different mechanical loadings", Engineering Fracture Mechanics, Vol. 218, No. , (2019), pp.

67

Rehman M.M., Zeeshan M., Shaker K., Nawab Y., "Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite", Cellulose, Vol. , No. , (2019), pp.

68

Bajwa, G.A., Nawab, Y., Umair, M., Rizwan, Z., "Techno-mechanical properties of cocoon, raw silk and filament of two mulberry silkworm (Bombyx mori L.) strains", Materialwissenschaft und Werkstofftechnik, Vol. 50(10), No. , (2019), pp.

69

Usman Ahmed, Muhammad Umair, Yasir Nawab, "Comparison of mechanical behaviour of Biaxial, Unidirectional and standard woven fabric reinforced composites", Fibers and Polymers, Vol. , No. , (2019), pp.

70

Zahid M, Nawab Y, Gulzar N, Rehan Z A, Shakir MF, Afzal A, Abdul RI, Tariq A, "Fabrication of Reduced Graphene Oxide (RGO) and nanocomposite with Thermoplastic Polyurethane (TPU) for EMI shielding Application", Journal of Materials Science: Materials in Electronics (JMSE), Vol. , No. , (2019), pp.

71

Muhammad Fayzan Shakir, Iqra Abdul Rashid, Asra Tariq, Yasir Nawab, Ayesha Afzal, Muhammad Nabeel, Ahmad Naseem, Usama Hamid, "EMI Shielding Characteristics of Electrically Conductive Polymer Blends of PS/PANI in Microwave and IR Region", Journal of Electronic Materials, Vol. , No. , (2019), pp.

72

Awais H., Nawab Y., Amjad A., Anjang A., Md Akil H., Zainol Abidin M.S., "Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites", Composites Part B: Engineering, Vol. 177, No. , (2019), pp.

73

Zeeshan M, Ali M, Anjum AS, Nawab Y, "Optimization of Mechanical/Thermal Properties of Recycled Cotton/Flax/Glass Hybrid Composite", Journal of Industrial Textiles, Vol. , No. , (2019), pp.

74

Shaker K, Nawab Y, Saouab A, "Experimental and numerical investigation of reduction in shape distortion for angled composite parts", International Journal of Material Forming, Vol. , No. , (2019), pp.

75

Umair M, Hamdani STA, Nawab Y, Asghar MA, Hussain T, "Compression and recovery behavior of three-dimensional woven spacer composites", Journal of Industrial Textiles, Vol. , No. , (2019), pp.

76

Nazir MU, Shaker K, Hussain R, Nawab Y., "Performance of Novel Auxetic Woven Fabrics Produced using Helical Auxetic Yarn", Materials Research Express, Vol. , No. , (2019), pp.

2018

77

Z. Masood, S. Ahmad, M. Umair, K. Shaker, Y. Nawab, M. Karahan, "Mechanical Behaviour of Hybrid Composites Developed from Textile Waste", Fibres & Textiles in Eastern Europe, Vol. 1(127), No. 26, (2018), pp.26

78

M. Umair, S. Talha, A. Hamdani, M. A. Asghar, T. Hussain, M. Karahan, Y. Nawab, and M. Ali, "Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites", Journal of reinforced plastics and composites, Vol. , No. , (2018), pp.

79

A. Zulifqar, K. Shaker, Y. Nawab, M. Umair, D. M. Baitab, and M. Maqsood, "Investigation of multi-layered woven car seatbelts with optimum performance", Industria Textila, Vol. 68, No. , (2018), pp.

80

M. Hussain, Y.Nawab, Z. Rizwan, A. Basit, "Investigation of Mechanical Properties of Auxetic Woven Polymer Composite Material", Material Science and Engineering Technology, Vol. , No. , (2018), pp.

81

Ali A., Shaker K., Nawab Y., Jabbar M., Hussain T., Militky J., Baheti V., "Hydrophobic treatment of natural fibers and their composites—A review", Journal of Industrial Textiles, Vol. 47, No. , (2018), pp.

82

Khan M.I., Akram J., Umair M., Hamdani S.T.A., Shaker K., Nawab Y., Zeeshan M., "Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity", Journal of Industrial Textiles, Vol. , No. , (2018), pp.

83

Jabbar M., Nawab Y., Karahan M., Ashraf M., Hussain T., "Mechanical Response of Novel 3D Woven Flax Composites with Variation in Z Yarn Binding", Journal of Natural Fibers, Vol. , No. , (2018), pp.

84

Shaker K., Nawab Y., Ayub Asghar M., Nasreen A., Jabbar M., "Tailoring the properties of leno woven fabrics by varying the structure", Mechanics of Advanced Materials and Structures, Vol. , No. , (2018), pp.

85

Rehman A., Jabbar M., Umair M., Nawab Y., Jabbar M., Shaker K., "A study on the interdependence of fabric pore size and its mechanical and comfort properties", Journal of Natural Fibers, Vol. , No. , (2018), pp.

86

Shaker K., Umair M., Jabbar M., Baitab D.M., Nawab Y., Afzal A., Ahmad S., "Effect of fabric structural design on the thermal properties of woven fabrics", Thermal Science, Vol. , No. , (2018), pp.

87

Hussain M., Nawab Y., Rizwan Z., Mumtaz A., Basit A., "Investigation of mechanical properties of auxetic woven polymer composite material: Untersuchung der mechanischen Eigenschaften von auxetisch gewebten Polymer-Verbundwerkstoffen", Materialwissenschaft und Werkstofftechnik, Vol. 49, No. , (2018), pp.

88

Nawab Y., Kashif M., Asghar M.A., Asghar A., Umair M., Shaker K., Zeeshan M., "Development & Characterization of Green Composites Using Novel 3D Woven Preforms", Applied Composite Materials, Vol. 25, No. , (2018), pp.

89

Nasreen A., Umair M., Shaker K., Hamdani S.T.A., Nawab Y., "Development and characterization of three-dimensional woven fabric for ultra violet protection", International Journal of Clothing Science and Technology, Vol. 30, No. , (2018), pp.

2017

90

Mumtaz Ali, Yasir Nawab, Abdelghani Saouab, Aima Sameen Anjum, Muhammad Zeeshan, "Fabrication induced spring-back in thermosetting woven composite parts with variable thickness", Journal of Industrial Textiles, Vol. , No. , (2017), pp.

91

Muhammad Umair, Khubab Shaker, Yasir Nawab, Abher Rasheed, Sheraz Ahmad, "A Study on the Twist Loss in Weft Yarn During Air Jet Weaving", Journal of Engineered Fibers and Fabrics, Vol. , No. , (2017), pp.

92

Madeha Jabbar, Khubab Shaker, Muhammad Umair, Yasir Nawab, "Optimizing the performance of woven protective gloves using grey relational analysis", Journal of the Textile Institute, Vol. , No. , (2017), pp.

93

Muhammad Umair, Khubab Shaker, Naseer Ahmad, Muzzamal Hussain, Madeha Jabbar, Yasir Nawab, "Simultaneous optimization of woven fabric properties using principal component analysis", Journal of Natural Fibers, Vol. , No. , (2017), pp.

94

K. Shaker, Y. Nawab, A. Saouab, and M. Ashraf, "Effect of silica particle loading on shape distortion in glass / vinyl ester-laminated composite platesg", Journal of the Textile Institute, Taylor & Francis, Vol. , No. , (2017), pp.

95

M. H. Ameer, K. Shaker, M. Ashraf, M. Karahan, Y. Nawab, S. Ahmad, and M. Ali Nasir, "Interdependence of moisture, mechanical properties and hydrophobic treatment of jute fibre-reinforced composite materials", Journal of the Textile Institute, Taylor & Francis, Vol. 108, No. , (2017), pp.

96

B. Aaboud, A. Saouab, and Y. Nawab, "Simulation of air bubbles creation compression and transport phenomena in resin transfer moulding", Journal of Composite Materials, Vol. 51, No. 29, (2017), pp.29

97

Ahmad S., Ashraf M., Ali A., Shaker K., Umair M., Afzal A., Nawab Y., Rasheed A., "Preparation of conductive polyethylene terephthalate yarns by deposition of silver & copper nanoparticles", Fibres and Textiles in Eastern Europe, Vol. 25, No. , (2017), pp.

2016

98

K. Shaker, M. Umair, M. Maqsood, Y. Nawab, S. Ahmad, A. Rasheed, M. Ashraf, and A. Basit, "A Statistical Approach For Obtaining The Controlled Woven Fabric Width", Autex Res. J., Vol. 0, No. 0, (2016), pp.0

99

M. Umair, Y. Nawab, and M. H. Malik, "Development and characterization of 3D preforms and their associated composites", J. Reinf. Plast. Compos, Vol. 0, No. 0, (2016), pp.0

100

Liaqat M, Samad HA, Hamdani STA, Nawab Y, "The development of novel auxetic woven structure for impact applications", The Journal of The Textile Institute, Vol. , No. , (2016), pp.

101

Nawab Y, Sonnenfeld C, Saouab A, Agogu� R, Beauch�ne P, "Characterisation and modelling of thermal expansion coefficient of woven carbon/epoxy composite and its application to the determination of spring-in", Journal of Composite Materials, Vol. , No. , (2016), pp.

102

Koyuncu M, Karahan M, Karahan N, Shaker K, Nawab Y, "Static and dynamic mechanical properties of cotton/epoxy green composites", . Fibers Text East Eur, Vol. , No. , (2016), pp.

103

Jabbar A, Militk J, Madhukar Kale B, Rwawiire S, Nawab Y, Baheti V., "Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers", Ind Crops Prod, Vol. , No. , (2016), pp.

104

Shaker K, Jabbar A, Karahan M, Karahan N, Nawab Y, "Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar", J Compos Mater, Vol. , No. , (2016), pp.

105

Umar N, Shaker K, Sheraz A, Nawab Y, "Investigating the mechanical behavior of composites made from textile industry waste", The Journal of The Textile Institute, Vol. , No. , (2016), pp.

106

Nazir MU, Shaker K, Nawab Y, Zohaib M, Khan MI, Umair M, "Investigating the effect of material and weave design on comfort properties of bilayer woven fabrics", J Text Inst, Vol. , No. , (2016), pp.

107

Afzal A, Ahmad S, Rasheed A, Ahmad F, Iftikhar F, Nawab Y, "Influence of Fabric Parameters on Thermal Comfort Performance of Double Layer Knitted Interlock Fabrics", Autex Res J, Vol. , No. , (2016), pp.

108

Maqsood M, Hussain T, Ahmad N, Nawab Y, "Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method", J Text Inst, Vol. , No. , (2016), pp.

109

Maqsood M, Khan MI, Shaker K, Umair M, Nawab Y , "Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials", J Text Inst, Vol. , No. , (2016), pp.

110

Maqsood M, Nawab Y, Shaker K, Umair M, Ashraf M, Baitab DM, et al, "Modelling the Effect of Weave Structure and Fabric Thread Density on Mechanical and Comfort Properties of Woven Fabrics", Autex Res J , Vol. , No. , (2016), pp.

111

Maqsood M, Nawab Y, Umar J, Umair M, Shaker K, "Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garments", J Text Inst, Vol. , No. , (2016), pp.

112

Ashraf, Waqas; Nawab, Yasir; Umair, Muhammad; Shaker, Khubab; Karahan, Mehmet, "Investigation of Mechanical Behavior of Woven / Knitted Hybrid Composites Investigation of Mechanical Behavior of Woven / Knitted Hybrid Composites", The Journal of The Textile Instituteextile institute, Vol. , No. , (2016), pp.

2015

113

A. Ali, K. Shaker, Y. Nawab, M. Ashraf, A. Basit, S. Shahid, and M. Umair, "Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material", J. Reinf. Plast. Compos, Vol. , No. 1, (2015), pp.1

114

H. Haji, A. Saouab, and Y. Nawab, "Simulation of coupling filtration and flow in a dual scale fibrous media", Compos. Part A Appl. Sci. Manuf, Vol. 76, No. 1, (2015), pp.1

115

M. Z. Khan, M. Ashraf, T. Hussain, A. Rehman, M. M. Malik, Z. A. Raza, Y. Nawab, and Q. Zia,, "In situ deposition of TiO2 nanoparticles on polyester fabric and study of its functional properties", Fibers Polym, Vol. 16, No. 5, (2015), pp.5

116

M. Maqsood, T. Hussain, M. H. Malik, and Y. Nawab, "Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments", J. Text. Inst, Vol. , No. , (2015), pp.

117

M. Maqsood, Y. Nawab, S. T. A. Hamdani, K. Shaker, M. Umair, and W. Ashraf, "Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns", J. Text. Inst., Vol. , No. 1, (2015), pp.1

118

Y. Nawab, P. Casari, N. Boyard, V. Sobotka, and F. Jacquemin, "In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup", J. Reinf. Plast. Compos, Vol. , No. 1, (2015), pp.1

119

K. Shaker, M. Ashraf, M. Jabbar, S. Shahid, Y. Nawab, J. Zia, and a. Rehman, "Bioactive woven flax-based composites: Development and characterisation", J. Ind. Text, Vol. , No. 1, (2015), pp.1

120

K. Shaker, Y. Nawab, M. U. Javaid, M. Umair, and M. Maqsood, "Development of 3D woven fabric based pressure switch", Autex Res. J., pp, Vol. , No. 1, (2015), pp.1

121

M. Umair, T. Hussain, K. Shaker, Y. Nawab, M. Maqsood, and M. Jabbar, "Effect of woven fabric structure on the air permeability and moisture management properties", J. Text. Inst, Vol. 0, No. 0, (2015), pp.0

122

Ashraf W., Nawab Y., Maqsood M., Khan H., Awais H., Ahmad S., Ashraf M., Ahmad S., "Development of seersucker knitted fabric for better comfort properties and aesthetic appearance", Fibers and Polymers, Vol. 16, No. , (2015), pp.

2014

123

Muhammad Maqsood, Tanveer Hussain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", The Journal of The Textile Institute, Vol. , No. , (2014), pp.

124

Muhammad Maqsood, Yasir Nawab, Muhammad Usman Javaid, Khubab Shaker, Muhammad Umair, "Development of seersucker fabrics using single warp beam and modelling of their stretch-recovery behaviour", The Journal of The Textile Institute, Vol. , No. , (2014), pp.

2013

125

Yasir Nawab, Salma Shahid, Nicolas Boyard, Frdric Jacquemin, "Chemical shrinkage characterization techniques for thermoset resins and associated composites", Journal of Materials Science , Vol. 48, No. 16, (2013), pp.16

126

Yasir Nawab,Frdric Jacquemin, Pascal Casari, "Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates", composite Part-B, Vol. 50, No. , (2013), pp.

127

Yasir Nawab, "Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite", Journal of composite Materials, Vol. , No. , (2013), pp.

2012

128

Yasir Nawab, Pascal Casari, Nicolas Boyard, et al, "Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment", Journal of Materials Science, Vol. 48, No. 6, (2012), pp.6

129

Yasir Nawab, Xavier Tardif, Nicolas Boyard, et al, "Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients", Composites Science and Technology, Vol. 73, No. , (2012), pp.

130

Yasir Nawab, Frdric Jacquemin, Pascal Casari et al, "Evolution of chemical and thermal curvatures in thermoset laminated composite plates during the fabrication process", Journal of composite materials, Vol. , No. , (2012), pp.

131

Yasir Nawab, Xavier Legrand, VladanKoncar , "Study of changes in 3D woven multilayer interlock fabric preforms while forming", Journal of textile institute, Vol. , No. , (2012), pp.


2022

1

Dr. Yasir Nawab, "Conference on Knowledge based Textiles, 2022", National Textile University, Venue: 1, (2022)

2021

2

Dr. Yasir Nawab, "International Conference on Polymers and Composites", National Textile University , Venue: 1, (2021)

3

Dr. Yasir Nawab, "International Conference on Value Addition and Innovation in Textiles (COVITEX), ", National Textile University, Venue: 1, (2021)

4

Dr. Yasir Nawab, "International Conference on Sugar Palm and Allied Fibre Polymer Composites 2021", Persatuan Pembangunan & Industri Enau, Malaysia (National Textile University, Co-organizer) , Venue: 1, (2021)

2020

5

Dr. Yasir Nawab, "2nd International Conference on Technical Textiles", National Textile University, Venue: 1, (2020)

2019

6

Dr. Yasir Nawab, "Dice Textile 2019", National Textile University/ Dice Foundation, USA, Venue: 1, (2019)

2018

7

Dr. Yasir Nawab, "Dice Textile 2018", National Textile University/ Dice Foundation, USA, Venue: 1, (2018)

2017

8

Dr. Yasir Nawab, "First International Conference on Technical Textiles ", National Textile University, Venue: 1, (2017)

9

Dr. Yasir Nawab, "Dice Textile 2017", National Textile University/ Dice Foundation, USA, Venue: 1, (2017)

2016

10

Dr. Yasir Nawab, "First National Conference on Technical Textiles ", National Textile University, Venue: 1, (2016)

2015

11

Dr. Yasir Nawab, "Challenges and opportunities towards value addition", National Textile University, Venue: 1, (2015)

2014

12

Yasir Nawab, Abdul Basit, et al., "Dependence of cure shrinkage of thermoset composite part on the reinforcement type", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

13

Yasir Nawab, Frdric Jacquemin, Pascal Casari, Nicolas Boyard, Yann Borjon-Piron, Vincent Sobotka, "Modeling the thermal expansion coefficients in the carbon/epoxy laminated composite parts", International conference on COmputational methods in Manufacturing Processes, Venue: Saint-tienne, France, (2014)

14

Khubab Shaker, Muhammad Usman Javed, Yasir Nawab, Muhammad Umair, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "Development of textile pressure sensors using multilayer interlock woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

15

Muhammad Umair, Khubab Shaker, Yasir Nawab, Muhammad Maqsood, Adeel Zulfiqar, Danish Mehmood Baitab, "To study the effect of loom parameters to optimize the woven fabric width using Taguchi approach", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

16

Muhammad Maqsood, Tanveer Hssain, Yasir Nawab, Khubab Shaker, Muhammad Umair, "Prediction of warp and weft yarn crimp in cotton woven fabrics", Autex World Textile Conference, Venue: Bursa - Turkey, (2014)

17

Yasir Nawab, Chung-Hae Park, et al, "Modeling the residual stress in woven thermoset composites parts for aerospace applications using finite element methods", 5th International symposium on aircraft materials, Venue: Marrakech, Morocco, (2014)

18

Muhammad Maqsood, Yasir Nawab, et al, "Prediction of crimp % for warp and weft yarns in cotton woven fabrics", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

19

Muhammad Umair, Yasir Nawab, et al, "3D shaped woven structures for structural composite application", First International Young Engineers Convention, Venue: Lahore Pakistan, (2014)

20

Khubab Shaker, Yasir Nawab et al, "Finite Element Modelling of Resin Flow in Woven Reinforcement for Composites Using Resin Transfer Moulding", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

21

Adeel Zulfiqar, Tanveer Hussain, Mumtaz Hassan Malik, Abdul Jabbar, Yasir Nawab, "High performance woven fabrics for impact applications", First International Young Engineers Convention, Venue: Lahore - Pakistan, (2014)

2013

22

Yasir Nawab, Frdric Jacquemin, et al. , "Characterization and modeling of cure dependentproperties of thermoset composites Application to the simulation of residual stresses", GDR Week (Mise en uvre des Composites et Proprits Induites), Venue: Albi, France, (2013)

23

Yasir Nawab, Nicolas Boyard, et al, "On the characterization of volume and in-plane chemical shrinkage of glass/ vinylester composites", JNC, Venue: France, (2013)

24

Yasir Nawab, Chung-Hae Park, et al, "Modelling of residual stress in thermoset laminated composites", JNC , Venue: Nantes, France, (2013)

25

Yasir Nawab, Chung-Hae Park, et al, "Shape distortion of carbon/epoxy composite parts during fabrication", ROSAM 2013, Venue: Rouen, France, (2013)

26

Xavier Tardif, Yasir Nawab, et al, "Appareils PVT multifonctionnels : Vers une caractrisation one shot des proprits thermophysiques", GDR Week (Mise en uvre des Composites et Proprits Induites), Venue: Albi, France, (2013)

2012

27

Yasir Nawab, Pascal Casari, et al, "Effet de lorientation des fibres sur la dilatation thermique hors plan de composite stratifi", SF2M , Venue: France, (2012)

28

Xavier Tardif, YasirNawab, et al, "A multifunctional device for polymer/composite characterization", FPCM 12, Venue: Newzealand, (2012)

29

Yasir Nawab, Nicolas Boyard, et al, "Measurement and modelling of chemical shrinkage of thermoset composites", Esaform, Venue: Germany, (2012)

30

Yasir Nawab,FrdricJacquemin, et al, "Shape evolution of carbon epoxy laminated composite during curing", Esaform, Venue: Germany, (2012)

2011

31

Yasir Nawab, Nicolas Boyard, et al , "A device to measure the shrinkage and heat transfers during the curing cycle of thermoset composites", 8th IBCAST, Venue: Pakistan, (2011)

32

Yasir Nawab, Nicolas Boyard, et al , "Measurement of cure shrinkage of thermoset composite by using mould PVT-alpha", 5th COMPTEST, Venue: Switzerland, (2011)

2010

33

Yasir Nawab, Xavier Legrand, et al , "Mouldability of 3D Woven Multilayer Interlock Carbon-Epoxy Composites", 7th IBCAST, Venue: Pakistan, (2010)


Book Title Subject Published Year Publisher
Composite Solutions for Ballistics Composite 2021 Elsevier, USA
Fibers for Technical Textiles Textiles 2020 Springer, USA
Structural Textile Design Interlacing and Interlooping Weaving and Knitting design 2017 CRC, Taylor & Francis Group, USA
Fabric Manufacturing Calculations Process and Product Process and product calculations involved in weaving and knitting 2017 Higher Education Commission, Pakistan
Advanced Textile Testing Techniques Textile Testing 2017 CRC, Taylor & Francis Group, USA
Heat Transfer in Polymer Composite Materials: Forming Processes From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses 2016 ISTE Ltd and John Wiley & Sons, Inc
Textile Engineering: An Introduction Textile 2016 De Gruyter
Etude de moulabilite des composites 3D tissus Textile, 3D weaving 2012 Editions Universitaires Europeennes.

2019

1 MS/MPhil Development and Modelling of Novel 3D Multilayer Auxetic Fabrics for Armoring
2 MS/MPhil Effect Of Glass Micro Spheres And Fabric Structure On Mechanical Properties Of Composites
3 MS/MPhil Effect of structural parameters on the puncture resistance of woven fabrics
4 MS/MPhil Investigation of Shape Distortion in Cylindrical Composite Parts
5 PhD Composite material solutions for armouring

2018

6 PhD Study of Particle Loaded Composite Fabrication Using Liquid Composite Moulding Technique
7 PhD Development of novel 3D woven reinforcements for high performance applications

2017

8 MS/MPhil Development and Characterization of 2DWoven Auxetic Fabric for Advance Applications
9 MS/MPhil Development of Thermoplastic Composites for Ballistic Protection
10 MS/MPhil Development and Characterization of Hybrid Composites
11 MS/MPhil Comparison of Mechanical Properties of Bi-Axial and Normal Woven Fabric Reinforced Composites
12 MS/MPhil Development of Explosion Resistant Auxetic Woven Fabrics
13 MS/MPhil Development of Jute Reinforced Hybrid Composite with Improved Mechanical Properties

2016

14 MS/MPhil Ballistic performance of 2D and 3D woven hybrid composites
15 MS/MPhil Effect of stitching on delamination properties of composites
16 MS/MPhil Optimization of weaving pattern of 3D woven structures for improved mechanical performance
17 MS/MPhil Process induced deformation in thermosetting composites
18 MS/MPhil Development and Characterisation of Auxetic Composite Structures
19 MS/MPhil Ageing of natural fibers reinforced composites (Temperature,water/moisture)

2015

20 MS/MPhil Development of machine for 3D weaving of high performance fibers
21 MS/MPhil To Investigate the Mechanical Behavior of Woven/ Knitted Hybrid Composites
22 MS/MPhil 3D woven comingled thermoplastic composites

2014

23 MS/MPhil Development of natural fiber composite with improved strength and antimicrobial activity
24 MS/MPhil Numerical analysis of self-healing composite materials
25 MS/MPhil Development and characterization of shaped woven multilayer structures and their corresponding composites
26 MS/MPhil Reduction in moisture regain of natural fibre composites and studying their ageing properties
27 MS/MPhil Development of a shape memory polymer composite
1
Decarbonizing the Textile Manufacturing Sector of Pakistan

Awarding Body: WWF- Pakistan
Awarding Year: 2022
Amount: 1

2
Enhancement of global competitiveness of Pakistani textile export value-chains by capacity building and product diversification (KnowTex) www.knowtex.pk

Awarding Body: HEC/ WORLD BANK (GCF-63)
Awarding Year: 2021
Amount: 207

3
"Sizing of Carbon Fiber tows" and "Development of Polyurea/ Polyurethane blends"

Awarding Body: NESCOM
Awarding Year: 2021
Amount: 1

4
Novel 3D woven hybrid composites-based bullet protection for vehicles

Awarding Body: HEC (NRPU-12477)
Awarding Year: 2021
Amount: 14

5
Industrial Profiling for Textile and Leather Sector in Pakistan

Awarding Body: WWF- Pakistan
Awarding Year: 2021
Amount: 2

6
Study to Explore and Assess the Existing Supply Chain in Textiles of Pakistan for producing and Exporting Technical Textiles

Awarding Body: WWF- Pakistan
Awarding Year: 2020
Amount: 2

7
Development of antibacterial and antiviral hospital textiles and protective suits using nanomaterial

Awarding Body: HEC
Awarding Year: 2020
Amount: 14

8
Indigenous Development Of Smart, Safe & Comfortable (S2C) Helmets For Civil And Combat Applications

Awarding Body: Higher Education Commission/ i-Textiles
Awarding Year: 2019
Amount: 16

9
Novel Textile Reinforced Composites with Improved Mechanical Properties for Sports and Automotive Applications

Awarding Body: HEC/ NRPU-8684
Awarding Year: 2019
Amount: 6

10
Light weight bullet proof vest made from 3D comingled woven thermoplastic composites and novel auxetic woven fabrics

Awarding Body: Higher Education Commission/ Industry
Awarding Year: 2017
Amount: 14

11
Novel 3D Woven Auxetic Pleated Fabric based Composites for Impact/Shock Absorption

Awarding Body: Higher Education Commission
Awarding Year: 2017
Amount: 4

12
Evaluation and modelling the Residual stresses in thermoset composite to control interlaminar failure

Awarding Body: Higher Education Commission/ Industry
Awarding Year: 2017
Amount: 2.0

13
Development, characterization and modeling of low cost sustainable hybrid composite parts with antimicrobial activity

Awarding Body: Higher Education Commission
Awarding Year: 2016
Amount: 15

14
Development of Eco-Friendly, Energy Efficient, Indigenous Sizing Machine

Awarding Body: Pakistan Science Foundation/ Industry
Awarding Year: 2015
Amount: 3

15
Experimental Investigation and modelling of Mechanical Behavior of Natural Fibers Composite Materials fabricated using local raw materials

Awarding Body: HEC
Awarding Year: 2014
Amount: 1

1
Dice Leadership Award
Dice Foundation USA  (2018)
2
Fellowship (F-2014/ FSD-7)
Institution of the Engineers, Pakistan  (2022)
3
Habilitation à Diriger des Recherches
University of Le Havre, France  (2021)
4
Fellowship (930192)
Textile Institute UK  (2019)
5
Best University Teacher Award 2016
Higher Education Commission (HEC) Pakistan  (2016)
6
Fellowship (M23110114)
International Society for Development and Sustainability, Japan  (2021)
7
Remarkable PhD Thesis in Science & Technology
Universi de Nantes, France  (2013)
8
Gold Medal
National Textile University  (2005)

Fellow
The Institution of Engineers, Pakistan

Fellow
The Textile Institute, UK

Fellow
International Society for Development and Sustainability (ISDS), Japan

Fellow
The Pakistan Academy of Engineering

Registered Engineer
Pakistan Engineering Council

Regular Member
Materials Research Society

Professional Member
Society of Plastic Engineers (SPE)

Member
American Society for Composites

Registered Expert (Composite Materials)
European Commission (European Research and Innovation)

International Journal of Polymer Science,

Advances in Materials Science & Engineering,

PLOS ONE,

Frontiers in Materials

homescontents