Teaching, research and run the office of graduate studies and research as Director
2022 | |
1 | Mohammed Jalalah 1,2 , Zubair Khaliq 3 , Zulfiqar Ali 4, Adnan Ahmad 4, Muhammad Bilal Qadir 4,* , Ali Afzal 4 , Umer Ashraf 4, M. Faisal 1,5, Mabkhoot Alsaiari 1,6, Muhammad Irfan 2 , Saeed A. Alsareii 1,7 and Farid A. Harraz, "Preliminary Studies on Conversion of Sugarcane Bagasse into Sustainable Fibers for Apparel Textiles", Sustainability, Vol. 14, No. 24, (2022), pp.24 |
2 | Bushra Mushtaq, Adnan Ahmad, Zulfiqar Ali, Muhammad Bilal Qadir, Zubair Khaliq, Muhammad Irfan, M. Waqas Iqbal, Abdul Jabbar, Adeel Zulifqar & Amir Shahzad, "Core Spun Based Helical Auxetic Yarn: A Novel Structure for Wearable Protective Textiles", Journal of Natural Fibers, Vol. 19, No. 16, (2022), pp.16 |
3 | Amir Shahzad 1,2,†, Muhammad Bilal Qadir 1,†, Zulfiqar Ali 1, Zubair Khaliq 1 , Muhammad Qamar Khan 3,* and Ick-Soo Kim 4,*, "Fabrication of Low-Twist and High-Strength Metallic Fibre Hybrid Spun Yarns", Applied Science, Vol. 12, No. 7, (2022), pp.7 |
2021 | |
4 | Fatima Iftikhar, Zulfiqar Ali, Tanveer Hussain, Ahsan Nazir & Dominique C. Adolphe, "A Multi-Criteria Decision-Making Approach for Woven Fabric Selection and Grading for Ladies Summer Apparel", Journal of Natural Fibers, Vol. 18, No. 10, (2021), pp.10 |
5 | Fatima Iftikhar, Zulfiqar Ali, Tanveer Hussain, Ahsan Nazir & Dominique C. Adolphe, "Influence of Yarn Count and Cover Factor on Mechanical, Comfort, Aesthetic and Hand Properties of Ladies’ Summer Apparel Fabrics", Journal of Natural Fibers, Vol. 18, No. 11, (2021), pp.11 |
2020 | |
6 | Khurram Shehzad Akhtar, Sheraz Ahmad, Ali Afzal, Wardah Anam, Zulfiqar Ali & Tanveer Hussain, "Influence and comparison of emerging techniques of yarn manufacturing on physical–mechanical properties of polyester-/cotton-blended yarns and their woven fabrics", The Journal of the Textile Institute, Vol. 111, No. 04, (2020), pp.04 |
7 | Fatima Iftikhar , Tanveer Hussain , Zulfiqar Ali , Ahsan Nazir , Dominique C. Adolphe & Laurence Schacher,, "Investigation of Thermo-Physiological Comfort and Mechanical Properties of Fine Cotton Fabrics for Ladies’ Summer Apparel", Journal of Natural Fibers, Vol. 17, No. 11, (2020), pp.11 |
2019 | |
8 | Muhammad Haris Ameer, Yasir Nawab, Zulfiqar Ali, Abdellatif Imad & Sheraz Ahmad, "Development and characterization of jute/ polypropylene composite by using comingled nonwoven structures", The Journal of Textile Institute, Vol. 110, No. 11, (2019), pp.11 |
9 | Amir Shahzad, Abher Rasheed, Zubair Khaliq, Muhammad Bilal Qadir, Muhammad Qamar Khan, Syed Talha Ali Hamdani, Zulfiqar Ali, Ali Afzal, Muhammad Irfan, Muhammad Shafiq & Ick Soo Kim, "Processing of metallic fiber hybrid spun yarns for better electrical conductivity” ", Materials and Manufacturing Processes, Vol. 34, No. 19, (2019), pp.19 |
2018 | |
10 | Muhammad Babar Ramzan, Abher Rasheed, Zulfiqar Ali, Sheraz Ahmad, Muhammad Salman Naeem and Ali Afzal “, "Impact of wash types and stitching parameters on shrinkage of knitwear made from pique fabric", International Journal of Clothing Science and Technology, Vol. online, No. **, (2018), pp.** |
11 | Amir Shahzad, Zulfiqar Ali Malik, Usman Ali, Zubair Khaliq, Ick Soo Kim, Tanveer Hussain, Muhammad Qamar Khan, Muhammad Zubair, Abher Rasheed, Muhammad Bilal Qadir, " Development and Characterisation of conductive ring spun hybrid yarns", The Journal of Textile Institute, Vol. online, No. **, (2018), pp.** |
12 | Amir Shahzad, Naseer Ahmad, Zulfiqar Ali, Ali Afzal, Muhammad Bilal Qadir, Zubair Khaliq and Muhammad Qamar Khan, "Statistical analysis of yarn to metal frictional coefficient of cotton spun yarn using Taguchi design of experiment", The Journal of Strain Analysis for Engineering Design, Vol. online, No. **, (2018), pp.** |
13 | Muhammad Bilal Qadir, Zulfiqar Ali Malik, Usman Ali, Amir Shahzad, Tanveer Hussain, "Response surface modeling of physical and mechanical properties of cotton slub yarns", Autex Research Journal, Vol. online, No. **, (2018), pp.** |
14 | Wasif Latif, Abdul Basit, Zulfiqar Ali, Sajjad Ahmad Baig,, "The Mechanical And Comfort Properties Of Cotton And Regenerated Fibers Blended Woven Fabrics, ", International Journal Of Clothing Science And Technology, Vol. Online, No. **, (2018), pp.** |
2017 | |
15 | Tanveer Hussain, Farooq Ahmed Arain, Zulfiqar Ali Malik, "Use of Taguchi Method and Grey Relational Analysis to Optimize Multiple Yarn Characteristics in Open-End Rotor Spinning", Autex Research Journal ISSN 1470-9589, eISSN 2300-0929, Vol. Volume: 17, No. Issue: 01, (2017), pp.Issue: 01 |
16 | Muhammad Zubair, Bohuslav Nechar and Zulfiqar Ali, "Predicting specific stress of cotton staple ring spun yarns: Experimental and theoretical results", Fibers & Textiles in Eastern Europe ISSN: 1230-3666, Vol. 25,, No. issue 2 (122), , (2017), pp. issue 2 (122), |
2016 | |
17 | Jawaria Umar, Tanveer Hussain, Zulfiqar Ali, Muhammad Maqsood, "Prediction modeling of compression properties of a knitted sportswear fabric using response surface method", International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, Vol. 10, No. 2, (2016), pp.2 |
2015 | |
18 | Tanveer Hussain, Zulfiqar Ali Malik, Zain Arshad and Ahsan Nazir, "Comparison of aComparison of artificial neural netwComparison of artificial neural network and adaptive neuro-fuzzy inference system for predicting the wrinkle recovery of woven fabricsrk and adaptive neuro-fuzzy inference system for predicting the wrinkle recovery of woven fabrics", The Journal of The Textile Institute, Vol. 106, No. 09, (2015), pp.09 |
2014 | |
19 | Noman Haleem, Sayed Ibrahim, Tanveer Hussain, Abdul Jabbar, Mumtaz Hassan Malik, Zulfiqar Ali Malik, "Determining the Light Transmission of Woven Fabrics through Different Measurement Methods and Its Correlation with Air Permeability", Journal of Engineered Fibers and Fabrics, Vol. 09, No. 14, (2014), pp.14 |
2013 | |
20 | Mumtaz Hasan Malik, Zulfiqar Ali Malik, Tanveer Hussain, Muhammad Babar Ramzan, "EFFECT OF SEWING PARAMETERS AND WASH TYPE ON THE DIMENSIONAL STABILITY OF KNITTED GARMENTS", AUTEX Research Journal, Vol. 13, No. 03, (2013), pp.03 |
21 | Hafsa Jamshaid, Tanveer Hussain*, and Zulfiqar Ali Malik, "Comparison of Regression and Adaptive Neuro-fuzzy Models for Predicting the Bursting Strength of Plain Knitted Fabrics", Fibers and Polymers , Vol. 14, No. 7, (2013), pp.7 |
22 | Noman Haleem*, Zulfiqar Ali Malik, Mumtaz Hassan Malik, Tanveer Hussain, Qummer Gillani, and Aisha Rehman , "Predicting the Air Permeability of Polyester/Cotton Blended Woven Fabrics", Fibers and Polymers , Vol. 14, No. 7, (2013), pp.7 |
23 | Abdul Moqeet, Abdul Jabbar, Tanveer Hussain, Zulfiqar Ali, & Zahoor-Ul-Haq, "Influence of splicing parameters on retained splice strength, elongation and appearance of spliced cotton/flax blended yarn", Indian Journal of Fibre & Textile Research, Vol. 38, No. 01, (2013), pp.01 |
2012 | |
24 | Zulfiqar Ali Malik, Noman Haleem, Mumtaz Hasan Malik, and Anwaruddin Tanwari, "Predicting the Tensile Strength of Polyester/Cotton Blended Woven Fabrics", Fibers and Polymers 135-703 Seoul, Korea Science & Technology Center 501, South Korea, Vol. 13, No. , (2012), pp. |
2011 | |
25 | Zulfiqar Ali Malik, Mumtaz Hasan Malik, Tanveer Hussain and Farooq Ahmed Arain , "Development of models to predict tensile strength of cotton woven fabrics", Journal of Engineered Fibers and Fabrics, USA, Vol. 6, No. 4, (2011), pp.4 |
26 | ZULFIQAR ALI MALIK, ANWARUDDIN TANWARI, AND HAFIZ-UR-REHMAN SHEIKH, "Influence of Plain and Twill (3/1) Weave Designs on the Tensile Strength of PC Blended Fabrics", MEHRAN UNIVERSITY RESEARCH JOURNAL OF ENGINEERING & TECHNOLOGY, Vol. 30, No. 1, (2011), pp.1 |
27 | Zulfiqar Ali Malik, Tanveer Hussain and Mumtaz Hasan Malik, "Modeling tensile strength of woven fabrics made from polyester/cotton blended warp yarns and 100 % cotton weft yarns", Industria textila, Romania, Vol. 62, No. 1, (2011), pp.1 |
28 | Zulfiqar Ali Malik, Tanveer Hussain, Mumtaz Hasan Malik and Anwaruddin Tanwari , "Selection of yarn for the predefined tensile strength of cotton woven fabrics", Fibers and Polymers 135-703 Seoul, Korea Science & Technology Center 501, Vol. 12 , No. 2, (2011), pp.2 |
2010 | |
29 | Tanveer Hussain, Zulfiqar Ali Malikand Anwaruddin Tanwari , "Prediction of tensile strength of polyester/cotton blended woven fabrics ", Indian Journal of Fibre & Textile Research New Delhi 110 012, India, Vol. 35 , No. 3, (2010), pp.3 |
30 | Zulfiqar Ali Malik, Tanveer Hussain, and Anwaruddin Tanwari , "Predicting tensile strength of yarns required for producing PET/Cotton blended woven fabrics of a predefined tensile strength", Fibers and Polymers 135-703 Seoul, Korea Science & Technology Center 501, South Korea, Vol. 11, No. 3, (2010), pp.3 |
31 | Zulfiqar Ali Malik, Mumtaz Hasan Malik, Tanveer Hussain and Anwaruddin Tanwari , "Predicting strength transfer efficiency of warp and weft yarns in woven fabrics using adaptive neuro-fuzzy inference system ", Indian Journal of Fibre & Textile Research New Delhi 110 012, India , Vol. 35 , No. 2, (2010), pp.2 |
2009 | |
32 | Mumtaz Hassan Malik, Tanveer Hussain, and Zulfiqar Ali, "Effect of fabric count on the tensile strength of blended woven fabrics", Journal of Engineering & Applied Science, , Vol. 28, No. 2, (2009), pp.2 |
2022 | |
1 | Dr. Zulfiqar Ali1, Dr. M. Bilal Qadir1, "Trending the naturally colored cotton for sustainable products", CKT 2020 - 1st Conference on Knowledge Based Textile, Venue: National Textile University Faisalabad, (2022) |
2021 | |
2 | Zulfiqar Ali*, Muhammad Bilal Qadir, "Development of CVC yarns by filament blending", COVITEX - 6th International Conference on Value Addition & Innovation in Textiles, Venue: National Textile University, (2021) |
2020 | |
3 | Muhammad Bilal Qadir, Amir Shahzad, Ali Afzal, Zubair Khaliq, Zulfiqar Ali*, Bushra Mushtaq, "Development of multi-structural auxetic yarn having wool yarn as core and polyester filament as covering", 2nd International Conference on Technical Textiles (ICTT-2020), , Venue: National Textile University Faisalabad, Pakistan, (2020) |
4 | Zulfiqar Ali, Amir Shahzad, Ali Afzal, Zubair Khaliq, Muhammad Bilal Qadir*, , "Development of sustainable apparel products through dope dyed filaments", 2nd International Conference on Technical Textiles (ICTT-2020), Venue: National Textile University Faisalabad, Pakistan, (2020) |
2019 | |
5 | Zulfiqar Ali, Amir Shahzad, Zubair Khaliq, Ali Afzal, M. Bilal Qadir, , "Cost of end breakages in ring spinning technique” ", 5th International Conference on Value Addition & Innovation in Textiles, Venue: National Textile University Faisalabad, Pakistan, (2019) |
6 | Muhammad Bilal Qadir, Zulfiqar Ali, Ali Afzal, Zubair Khaliq, Amir Shahzad, "Enhanced thermo-physiological comfort of denim fabrics with coolmax/Lycra blended weft yarns", 5TH Conference on Value Addition & Innovation in Textiles, Venue: National Textile University Faisalabad, Pakistan, (2019) |
2018 | |
7 | Dr. Zulfiqar Ali, Muhammad Shahnawaz, "Development of Comfortable Fire Resistant Fabrics for Bed Sheets ", 1st International Conference on innovation & Entrepreneurship in Textiles (IETEX 2018) , Venue: National Textile University, Faisalabad, Pakistan., (2018) |
8 | Zulfiqar Ali Malik , Amir Shahzad , Ali Afzal , Zubair Khaliq , Muhammad Bilal Qadir * , "Spun Yarn Quality Requirements for Knitting Industry", 1st International Conference on Emerging Trends in Knitting, Venue: National Textile University, Faisalabad, Pakistan, (2018) |
2017 | |
9 | Zulfiqar Ali Malik1, Tanveer Hussain and Zain Arshad, "Modelling the Wrinkle Recovery of PC Blended Woven Fabrics", 4th International Conference on “ Value Addition and Innovation in Textiles, Venue: National Textile University, Faisalabad, (2017) |
2016 | |
10 | Zulfiqar Ali, Waseem Ibrahim, "Textiles for near infrared camouflage", 1st National Conference on Technical Textiles, Venue: NTU, (2016) |
2014 | |
11 | Zulfiqar Ali Malik and Farooq Ahmed Arain, "Modeling the tensile strength of woven fabrics made from 100 % cotton warp yarns and polyester/cotton blended weft yarns", International Young Engineers Conference, Venue: UET Lahore, (2014) |
2013 | |
12 | Zulfiqar Ali Malik and Farooq Ahmed Arain, "Development of generalized models for yarn selection to meet tensile strength of cotton and poly/cotton woven fabrics", 2nd International Conference on Value Addition & Innovation in Textiles, Venue: National Textile University Faisalabad, Pakistan, (2013) |
2011 | |
13 | Zulfiqar Ali Malik, "Impact of crossing yarn linear density on the tensile strength of polyester/cotton blended woven fabrics", 1st International Conference on Value Addition & Innovation in Textiles, Venue: National Textile University Faisalabad, Pakistan, (2011) |
Book Title | Subject | Published Year | Publisher |
Textile Engineering An Introduction | Textile | 2016 | De Gruyter Oldenbourg |
2020 | ||
1 | Master | Effect of Different Fancy Yarns on the Physical and Comfort Properties of Knitted Fabrics |
2 | Master | Development of Gauze Dressing Fabric with Improved Antibacterial and Thermal Regulation Properties |
3 | Master | Development of Hybrid Non-Woven Needle Punched Fabric for Thermal Insulation |
4 | Master | A Novel Antibacterial Face Mask with Green Synthesized Nanoparticles and Extract |
5 | Bachelor | Development of curtain cotton fabric with improved shrinkage |
6 | Bachelor | Comparison of knit fabric properties made from normal ring and hybrid yarns |
7 | Bachelor | Development of cut resistance gloves by using polyester and cotton hybrid yarns |
8 | Bachelor | Comparison of hybrid and normal yarn properties made on ring frame |
2019 | ||
9 | Master | Investigation of antistatic and comfort properties of conductive knitted fabric for clothing |
10 | Master | Effect of tri-blend ground yarn, plating yarn and fabric construction on thermo-physiological properties of socks |
11 | Master | Development of core spun based auxetic yarns and fabrics for mechanical applications |
12 | Bachelor | Effect of polyester denier on the crease recovery of PC fabrics |
13 | Bachelor | Development of wicking braids by using yarns having novel air cavities |
14 | Bachelor | Development of tri-blend yarn for comfortable ladies winter suiting |
15 | Bachelor | Development of novel hybrid yarn for antistatic purpose |
2018 | ||
16 | Bachelor | Development of low cost, comfortable, cut resistant gloves by using Kevlar and other fibers. |
17 | Bachelor | Development of low cost and comfortable fire-fighter's uniform |
18 | Bachelor | Development of cut resistance gloves by using E-glass filaments and other fibers |
2017 | ||
19 | Master | Development and characterization of conductive ring spun hybrid yarns |
20 | Master | Influence of different spinning techniques on comfort properties of PC blended woven fabrics |
21 | Bachelor | Impact of traveller wear on quality parameters of yarn |
22 | Bachelor | Development of hollow polyester yarn and fabrics to investgate the aesthetic and comfort properties |
23 | Bachelor | Development of carbon black polyester yarns for NIR Camouflage |
24 | Bachelor | Impact of ring wear on the yarn quality parameters |
2016 | ||
25 | Master | Development of comfortable fire resistant sheeting fabrics, |
26 | Master | Development of Antimicrobial Spun Yarns suitable for socks and under garments |
27 | Master | Impact of elastane %age of on dimensional stability of socks |
28 | Bachelor | Development of low cost, comfortable, cut resistant gloves by using Kevlar and other fibers. |
29 | Bachelor | Development of low cost and comfortable fire-fighter's uniform |
30 | Bachelor | Development of cut resistance gloves by using E-glass filaments and other fibers |
2015 | ||
31 | Master | Prediction of Pilling Behavior of Nylon/Cotton Blended Knitted Socks |
32 | Master | Comparative study of comfort properties of plaited knitted fabrics for summer apparel use |
33 | Bachelor | Development of improved wound healing yarn for wound care applications |
34 | Bachelor | Production and characterization of natural silk at national textile research center Faisalabad. |
35 | Bachelor | Study the physical and mechanical properties of cellulosic tri-blend ring spun yarns. |
36 | Bachelor | To study the effect of bamboo viscose on the moisture management and anti-bacterial properties of gauze |
2014 | ||
37 | Bachelor | Effect of draw frame rubber cots hardness on yarn quality |
38 | Bachelor | Study the relationship of yarn strength and elongation |
39 | Master | Modeling the wrinkle recovery of polyester/cotton woven fabrics |
40 | Master | MODELING THE STRETCH AND RECOVERY PROPERTIES OF KNITTED FABRICS FOR COMPRESSION SPORTSWEAR |
2013 | ||
41 | Master | MODELLING THE AIR PERMEABILITY OF POLYESTER COTTON BLENDED WOVEN FABRICS |
42 | Bachelor | Benefits of draw frame in the spinning process |
43 | Bachelor | Effetc of blow room and card waste composition on yarn properties |
44 | Master | Optimizations of sewing parameters to minimize seem damage after washing in knitwear. |
2012 | ||
45 | Bachelor | Study of energy conservation in the air conditioning unit at Shamas Textile Mills |
46 | Bachelor | Effect of different spinning systems on yarn hairiness |
47 | Master | Study of moisture management performance of various cotton/polyester yarns in knitted structures |
2011 | ||
48 | Master | Effect of sewing parameters on the dimensional stability of knitted garments |
49 | Master | Modeling the mechanical properties of ring spun slub yarn used in denim industry |
50 | Bachelor | Effect of short fibers on drafting wave at finisher draw frame, simplex and ring frame |
51 | Bachelor | Comparison of gentle and aggressive blow room lines and their effect on yarn properties |
1 |
DEVELOPMENT OF LADIES SUMMER WEAR FABRICS WITH IMPROVED THERMO- PHYSIOLOGICAL AND SENSORIAL COMFORTAwarding Body: HEC |
2 |
Development of an intelligent contamination removal system from cotton during processing in the textile spinning millsAwarding Body: HEC |